Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/K3RXH5L4M6AGFCL6ZHIU36HTVGTDUGMH/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "D5768B53DBA24B81A1FD3DB55E234A62@Ron8300PC",
    "message_id_hash": "K3RXH5L4M6AGFCL6ZHIU36HTVGTDUGMH",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/K3RXH5L4M6AGFCL6ZHIU36HTVGTDUGMH/?format=api",
    "sender": {
        "address": "w5rkn (a) w5rkn.com",
        "mailman_id": "ce8329f57b214c74b5462b39cfe26858",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/ce8329f57b214c74b5462b39cfe26858/emails/?format=api"
    },
    "sender_name": "Ronald G. Parsons",
    "subject": "[amsat-bb] Re: AO-73 keps",
    "date": "2013-11-27T18:03:15Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Using the keps from this morning (epoch 13331.102), the Doppler corrections by SatPC32 are slightly closer than yesterdays keps. I got the following frequencies from a 40 deg pass about 1739 UTC.\nThe frequencies are the frequency “at the satellite” calculated by SatPC32 to place the center of the telemetry in the middle of my 3.0 kHz USB passband. Thus the frequency of the center “at the satellite” are 1.50 kHz higher than these.\nElevation      xx where the frequency is 145935.xx MHz\n5                  .88\n10                .78\n15                .76\n20                .71\n25                .68\n30                .68\n35                .62\n40                .55\n35                .48\n30                missing\n25                .44\n20                .43\n15                .35\n10                .33\n5                  .28\n\nThus a change of only about 600 Hz over the entire pass, a little better than yesterday. \n\nRon W5RKN\n",
    "attachments": []
}