Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KGHJ7GEVAYCXKSXVRSR6N7QKEQIRUGW4/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "CAKdmorX+uziLZuQBraDcKhPOg3cG3TyWQPhk5=bCLckqYaLWAw@mail.gmail.com",
    "message_id_hash": "KGHJ7GEVAYCXKSXVRSR6N7QKEQIRUGW4",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/KGHJ7GEVAYCXKSXVRSR6N7QKEQIRUGW4/",
    "sender": {
        "address": "kb3pmr (a) gmail.com",
        "mailman_id": "17744276ccf34b58a9823a86aaad0574",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/17744276ccf34b58a9823a86aaad0574/emails/"
    },
    "sender_name": "Robert C. Campbell",
    "subject": "[amsat-bb] Help call for a Yeasu GS-232B",
    "date": "2013-05-18T23:38:42Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Today while working the sats with Satpc32 the G-5500 would rotate east to\nwest but not return with a call from PSTrotator.\nIt seemed to get progressively worse and I would have to return the rotator\nto east manualy using the manual box. I checked for broken wires from the\nrotator to the manual box and everything wrings out fine. The rotator works\nfine in manual mode...push the switches for az/el and the rotator turns and\nreturns the proper position indication on the needles. By the end of the\nday the GS-232 is not communicating with the G-5500 at all and will not\ncommand or return a rotator position to the computer via satPC32. My\nthoughts are...the serial board in the dell laptop, bad serial cable, or\nbad GS-232. Baud rates, com. ports and general set up for SatPC32\nremain unchanged and have worked for the last 3 plus years. I can afford\nand new serial cable. Thoughts welcome here or contact me off page at\[email protected]\n\nThanks\nBob\n",
    "attachments": []
}