Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KK64Z2ILFABUVKOVOOBZPT65GGJPG7AX/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "KK64Z2ILFABUVKOVOOBZPT65GGJPG7AX",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/6UYQJBRVLNGLAWP25JK6KH2YQ4LIF42H/?format=api",
    "sender": {
        "address": "vk4tec (a) tech-software.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Andrew Rich",
    "subject": "Re: [amsat-bb] FalconSat-3 sig level to decode",
    "date": "2017-10-13T09:48:54Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6UYQJBRVLNGLAWP25JK6KH2YQ4LIF42H/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Ken \n\nCould you give me a hand\n\nI have falconsat3 packets coming in on sdr#\n\nI am using soundmodem but then the packets don't go anywhere\n\nCan you help me get direwolf running on windows so I can pass them to the aprs-is\n\nI am trying ui-view but I don't think it know what to do with the packets\n\nStill looking for a good sdr# doppler solution \n\nI have a few things up my sleeve yet\n\nAndrew \n\nSent from my iPhone\n\n> On 13 Oct 2017, at 8:17 am, Ken Swaggart <[email protected]> wrote:\n> \n> I'm using  the AirSpy (not mini) with SDR#. Doppler tuning with homebrew\n> software. Haven't noticed lost packets when the SDR freq changes, but will\n> be on the lookout for that.\n> \n> The audio loopback is Virtual Audio Cable. \n> \n> SSB Preamp\n> \n> Rotator is a G5500 and LVB Tracker controlled  by my homebrew software. (I\n> really like the LVB Tracker!)\n> \n> Sound modem is Dire Wolf which feeds APRS-IS.  At the present time I'm just\n> watching the packets scroll by on the Dire Wolf display. My main goal was to\n> Igate the FalconSat-3 packets.\n> \n> 73,\n> Ken, W7KKE\n> \n> -----Original Message-----\n> From: Andrew Rich [mailto:[email protected]] \n> Sent: Thursday, October 12, 2017 15:07\n> To: Ken Swaggart <[email protected]>\n> Cc: AMSAT -BB <[email protected]>; Australian APRS Users\n> <[email protected]>\n> Subject: Re: [amsat-bb] FalconSat-3 sig level to decode\n> \n> \n> Hi Ken \n> \n> I thought you might have good antenna \n> \n> Hey \n> \n> So your on windows \n> \n> + AirSpy Mini\n> + SDR#\n> + What audio loop back\n> + Preamps\n> + Rotator - from what program\n> + What Sound modem ?\n> + What APRS / TNC style program\n> \n> - Andrew - \n> \n> \n>> On 13 Oct 2017, at 4:12 am, Ken Swaggart <[email protected]> wrote:\n>> \n>> On this morning's FalconSat-3 pass, I checked the signal required to \n>> decode using Dire Wolf. It was 18 dB SNR, so that's roughly S3 +/- \n>> above the noise floor.\n>> \n>> RX setup: AirSpy SDR, SDRsharp, mast-mounted preamp, 15  X 15 X Yagi,\n> G5500.\n>> \n>> 73,\n>> Ken, W7KKE\n>> \n>> _______________________________________________\n>> Sent via [email protected]. AMSAT-NA makes this open forum available \n>> to all interested persons worldwide without requiring membership. \n>> Opinions expressed are solely those of the author, and do not reflect the\n> official views of AMSAT-NA.\n>> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb\n> \n\n",
    "attachments": []
}