Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KXIE5FG45ZQM7ST5RHDKIA6VZ77T6LGF/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "KXIE5FG45ZQM7ST5RHDKIA6VZ77T6LGF",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/KXIE5FG45ZQM7ST5RHDKIA6VZ77T6LGF/",
    "sender": {
        "address": "k5oe (a) aol.com",
        "mailman_id": "aee3209b1433498d8db2ef6ec0d414c3",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/aee3209b1433498d8db2ef6ec0d414c3/emails/"
    },
    "sender_name": "K5OE",
    "subject": "[amsat-bb] Battery-powered UHF Preamp suitable for Arrow or Elk\tandHT?",
    "date": "2011-03-04T14:31:27Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KTXR5XOMSGNR4G3LVTLZRIQZWDZVA4F3/"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "\nBryan,\nI built a cheap (about $17 as I recall) little Ramsey UHF preamp in a small enclosure with a 9 V battery rubber-banded to the Arrow boom, but found the Arrow had so much gain at 70 cm, even AO-27 was workable at the horizon.  I used an external MFJ diplexer in lieu of the Arrow built-in-handle diplexer to protect the preamp from RF on transmit (worked fine, BTW).   If you don't find you can hear that well, take a look at your coax and connectors between the antenna and the rig for unusual losses. \n\nI occasionally see the ARR non-relay preamps going on ebay for under $50 as well, and one of those with a double-ended BNC connector would bolt right onto the Arrow driven element connector. \n\n73,\nJerry, K5OE\n\n\n\n> Does anyone have a recommendation for a UHF preamp suitable for use with an\n> HT and an Arrow? I always wish I had one when I listen for SO-50... it seems\n> like it ought to be inline with BNC connectors and battery powered to\n> maintain portability...\n\n> Thanks in advance!\n\n> Bryan Green KL7CN\n> Usually /W6 in CM98fn\n              408-836-7279      \n\n\n\n",
    "attachments": []
}