Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KZKVN7CQV4IUOKI2X6GPBB76NSJKBU4W/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "3E5E15CF85DF47E8A256C9055FC8DA02@Athlon",
    "message_id_hash": "KZKVN7CQV4IUOKI2X6GPBB76NSJKBU4W",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/O6XMOX4DGTT5T2S36PCTFY7OITUHSTWB/?format=api",
    "sender": {
        "address": "ve4yz (a) mts.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Alan VE4YZ",
    "subject": "[amsat-bb] Re: SatPC32, Yaesu FT-736, and KCT",
    "date": "2009-10-27T02:56:06Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/O6XMOX4DGTT5T2S36PCTFY7OITUHSTWB/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/XMCLRCTELYV7HYVLUGJPWSIN3UG2KOL5/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi Jim,  SATPC32 will run the FT736r directly using a serial port or a\nUSB/Serial adapter to the 6 pin DIN CAT port on the radio.  However, the\ncable must include a TTL/Serial converter.  Page 13 of my FT736r manual\nusing GND, S.IN only  If you are already running directly from PC to Radio\nwith the proper cable you need to confirm the baud rate on SATPC32 is 4800\nas that is the only rate the 736r understands.\n\nWhen I used to run WISP for GO-32, it did NOT run the radio or rotators.  It\njust ran the TNC.  SatPC32 did the radio and rotator controller.\n\nI made a TTL/Serial adapter and mounted it inside the DB9 connector. See\nhere:\n\nhttp://picasaweb.google.com/ve4yz.alan/RS232TTL#\n\n\nHope this helps\n\n73, Alan VE4YZ\nEN19kv\nAMSAT LM 2352 \nhttp://www.wincube.ca\n\n\n \n\n> -----Original Message-----\n> From: [email protected] \n> [mailto:[email protected]] On Behalf Of Jim Bennett\n> Sent: October 26, 2009 9:09 PM\n> To: [email protected]\n> Subject: [amsat-bb] SatPC32, Yaesu FT-736, and KCT\n> \n> Has anyone got this configuration working?  My current setup is:\n> \n>  \n> \n> Yaesu FT-736, WISP, Kansas City Tracker/Tuner with Yaesu 5400 \n> rotor control box.\n> \n>  \n> \n> I have try to use Satpc32 with the KCT and it will interface \n> with the rotor control, but will not tune the radio.  \n> \n>  \n> \n> Do I need a separate cable for the data link?  Or will \n> Satpc32 interface with KTC and tune thru the KTC board?\n> \n>  \n> \n> Thanks for any info.\n> \n>  \n> \n> Jim\n> \n> KE4KOL\n> \n>  \n> \n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of \n> the author.\n> Not an AMSAT-NA member? Join now to support the amateur \n> satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> \n\n",
    "attachments": []
}