Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/LAZRYMSKCA7LYFFAPGBXLGD73BFSMLGH/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "LAZRYMSKCA7LYFFAPGBXLGD73BFSMLGH",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/LAZRYMSKCA7LYFFAPGBXLGD73BFSMLGH/?format=api",
    "sender": {
        "address": "billdz.geo (a) yahoo.com",
        "mailman_id": "cf72c3fefd9647e5b0216b2b0300c538",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/cf72c3fefd9647e5b0216b2b0300c538/emails/?format=api"
    },
    "sender_name": "Bill Dzurilla",
    "subject": "[amsat-bb]  Problem with mast-mounted ARR preamp, help please",
    "date": "2009-12-25T20:59:16Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hello and Merry Christmas,\n\nI have an ARR SP432VDG preamp, which is mast-mounted to an Elk antenna in my attic. This set-up has worked well until today, when I did not hear any sats with 70cm downlink.\n\nI then tried to see if I could bring up the local 70cm repeaters. Interestingly, I could key the repeaters and hear them ID for about a second, then I would lose the signal completely (e.g., \"This is K4\" then nothing).\n\nSo it appears that the RF sensor is working and enabling me to transmit properly, and that when I unkey after a transmission I receive properly for one second, but no reception after that one second.\n\nI'm thinking it must be a bad relay. Any thoughts or things to try before I send it for repair?\n\nMerry Christmas and 73,\nBill NZ5N \n\n\n      \n",
    "attachments": []
}