Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/LP5MFEALFVNCUQJSFK6MCRYONHMCD2PG/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAJCSnOZmi1=fnUj43GQQ_RWBLiEYBLATmUzbgzLRNcJ5rM3HBg@mail.gmail.com",
    "message_id_hash": "LP5MFEALFVNCUQJSFK6MCRYONHMCD2PG",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/P3W76DKQKSOHK7XW3BXLFVFCOVDOH7S3/?format=api",
    "sender": {
        "address": "scott23192 (a) gmail.com",
        "mailman_id": "120e10e05ba14969a11da0a96d21e355",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/120e10e05ba14969a11da0a96d21e355/emails/?format=api"
    },
    "sender_name": "Scott",
    "subject": "Re: [amsat-bb] PSK on NO-84, no joy",
    "date": "2020-03-23T20:31:41Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/P3W76DKQKSOHK7XW3BXLFVFCOVDOH7S3/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Keep trying, George!\n\nOn this last pass, I saw another station pop up for a second but didn't\ndecode the call cleanly - bet that was you.\n\n20 watts will definitely work depending on the characteristics of your\nantenna.  I experimented w/ 5 watts on my long wire and got into the\ntransponder just fine.  However, to get a bit more range I run 35 or so\ngenerally.  I'm guessing that it helps that my antenna is so low to the\nground (~15 ft on average).\n\nI know zero about the 10 meter band, but it never ceases to amaze me that a\nlong wire  stretched across a heavily wooded yard can be heard by a\nsatellite only 10-15 degrees above the horizon.  I'll bet your antenna &\npower output will do fine depending on what direction the satellite is\ncoming from.\n\nIf I might add, I closely monitor the 'ALC' level on my FT-857d throughout\nthe pass.  As the radio heats up, I have to make small adjustments to the\nTX audio level from the Signalink to keep a bar or two showing on the ALC\nmeter.  That's my feedback of what audio level I'm sending out, and there\nis a CLEAR difference in my PSK31 signal on the downlink when I adjust the\nTX audio to maintain an appropriate level.\n\n-Scott,  K4KDR\n\n=======================\n\nOn Mon, Mar 23, 2020 at 4:19 PM George Henry via AMSAT-BB <\[email protected]> wrote:\n\n> Not seeming to have any luck with PSK31 on NO-84...  I am seeing and\n> decoding the beacon and other stations okay, but don't see my signal in the\n> waterfall.  Using DopplerPSK for the uplink and FLdigi for the downlink.\n>\n> I suspect that my meager 20 watts to a dipole isn't cutting it...\n>\n> George, KA3HSW\n>\n",
    "attachments": []
}