Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/LSPUAODJT32WUX77C65N6WIOM3EVBG6X/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "LSPUAODJT32WUX77C65N6WIOM3EVBG6X",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/I2ZMU5Y4TALAWXZ2ONGEBR4NVUBRAFFD/?format=api",
    "sender": {
        "address": "lucleblanc6 (a) videotron.ca",
        "mailman_id": "9e00802147284c40880480833e06c230",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/9e00802147284c40880480833e06c230/emails/?format=api"
    },
    "sender_name": "Luc Leblanc",
    "subject": "[amsat-bb] Re: AIDC 3731 problem?",
    "date": "2008-09-10T03:53:48Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/I2ZMU5Y4TALAWXZ2ONGEBR4NVUBRAFFD/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "On 9 Sep 2008 at 18:33, Doug Kuitula wrote:\n\n> Hi all,\n>  I've been trying to receive the 2.4 ghz from AO-51 using an AIDC-3731 downconverter with a grill. Any time I plug in the wall wart that came with the unit, I get  S-9  noise on my receiver. The receiver is an Alinco DR-1200. I know it's not the best. But it's what I got. From the material I got with the downconverter, it needs 24 volts. Is that fixed in stone, or can I use something less for voltage?  I think I'll try a couple of 12v batteries in series. Has anyone else had the same problem? Any suggestions will be appreciated.\n>  73 and hope  to make some more contacts on AO-51. de Doug KA8QCU\n> _______________________________________________\n\nI can used the 12v from the FT-847 without any noticeable change. I was told that 24v was used on mmds system to compensate for very long \ncoaxial cable run and i think there is some kind of voltage limiter in the downconverter.\n\nI used about 100 feet of RG-59 and i have about S1 to S3 of noise but when signal are at TCA signal peak at 40DB over S9. If you cannot get \nan attenuator used a coax coil this will reduced your noise signal level.\n\n\n\"-\"\n\n\nLuc Leblanc VE2DWE\nSkype VE2DWE\nwww.qsl.net/ve2dwe\nWAC BASIC CW PHONE SATELLITE\n\n \n\n",
    "attachments": []
}