Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/LZB3DQW6KQHGSHS2BEU5IKJ6BGKDNBMA/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "002201c86843$54a360f0$0201a8c0@desk",
    "message_id_hash": "LZB3DQW6KQHGSHS2BEU5IKJ6BGKDNBMA",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/LZB3DQW6KQHGSHS2BEU5IKJ6BGKDNBMA/",
    "sender": {
        "address": "reichec (a) verizon.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Charles Reiche",
    "subject": "[amsat-bb]  Fw: FM narrow mode for DOPPLER.SQF file (for ISS)",
    "date": "2008-02-05T22:06:16Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "For anyone that has a 910 and satpc32, here is a chat I had with DK1TB.\n\nCharlie\nN3CRT\n\n----- Original Message ----- \nFrom: Erich Eichmann \nTo: Charles Reiche \nSent: Sunday, February 03, 2008 4:12 AM\nSubject: Re: FM narrow mode for DOPPLER.SQF file\n\n\nHi Charles,\nat present SatPC32 can't switch the IC-910H to FMN. The manual mentions only a CAT  command for FM (cmd 4), but no command for FMN.\n\nMeanwhile I know that there are undocumented commands that switch the IC-910H to FMN (cmd 5 sub cmd 2. I have just tested that and it works (with the IC-821H and other Icom radios this command doesn't work at all). \n\nSo, I think, I can modify the program with the next update and include the special FMN  command for the IC-910H. \n\n73s, Erich, DK1TB\n  ----- Original Message ----- \n  From: Charles Reiche \n  To: [email protected] \n  Sent: Sunday, February 03, 2008 1:21 AM\n  Subject: FM narrow mode for DOPPLER.SQF file\n\n\n  Im am learning the ins and outs of your fine program, but I have run into a stumbling block...\n  I have an Icom IC-910h connected via a rigblaster PNP.\n  My  file entry for ISS voice mode reads as follows:\n\n  ISS,145800,437800,FM,FMN,NOR,0,0,Cross band repeater\n\n  The sub band refuses to go to Narrow mode. If I turn off CAT I can manually enter the sub band and press and hold the FM button to enter Narrow mode but this gets reset to FM on the next tune cycle.\n\n  I have also tried setting both bands to FMN, without sucess.\n\n  Is your program capable of setting this mode on my Icom?\n  I am using version 12.6\n\n  Thanks\n  Charlie\n  N3CRT\n",
    "attachments": []
}