Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/M5NHK6D27V7OGAXOZMVFQRT3L4FZNLUG/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "!&!AAAAAAAAAAAYAAAAAAAAAI0qOvzY0LdKpnn+wEwUEvbCgAAAEAAAAH3EsE7+YKFEpviVfzxZfLYBAAAAAA==@stx.rr.com",
    "message_id_hash": "M5NHK6D27V7OGAXOZMVFQRT3L4FZNLUG",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/JI4Q2GX5QFZI5H66XOSH57AB2LXLF63M/",
    "sender": {
        "address": "tower2 (a) stx.rr.com",
        "mailman_id": "1cd4fee8700c4fad9e518636e9db95c4",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/1cd4fee8700c4fad9e518636e9db95c4/emails/"
    },
    "sender_name": "H. Vordenbaum",
    "subject": "[amsat-bb] Re: Ham IV rotor problem",
    "date": "2011-01-06T01:36:07Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/NEWJ2QJAV3756YH6Z7KQBMFXL6UHUM6L/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I had the wiper arm actually break off once years ago.\n73, K5HV\n\n\n-----Original Message-----\nFrom: [email protected] [mailto:[email protected]] On\nBehalf Of Scott Armstrong\nSent: Wednesday, January 05, 2011 15:02 PM\nTo: [email protected]; [email protected]\nSubject: [amsat-bb] Re: Ham IV rotor problem\n\n\nHi Craig,\n \nI've attached a copy of the HamIV  manual. Let me know if you get it OK.  It\nhas some troubleshooting info towards the back.\n \n>From your problem description, my bet is that the sweeper arm on the\npotentiometer inside the rotor is no longer making contact. I've had several\nwear out over the years.\nOf course, this is the worse case scenario requiring the rotor to be removed\nand disassembled.\n \nHowever, you might get lucky and find something in the control box power\nsupply has failed or an open/intermittent in the cable between the control\nbox and rotor. \n \nGood Luck,\n \nScott AA5AM\n \n \n\n \n\n\n> From: [email protected]\n> To: [email protected]\n> Date: Wed, 5 Jan 2011 12:26:13 -0800\n> Subject: [amsat-bb] Ham IV rotor problem\n> \n> Greetings and happy new year to my fellow sat-ops. I thought I would try\nhere before searching the entire 'net, for some tips in trouble shooting a\nrotor problem. My up/down link sat antennas are mounted on a common boom,\nfixed el., above my HF yagi. I turn all of it with a very old Ham IV rotor\nand the original CDE controller. Here is the problem. The rotor turns fine,\nbut there is no readout of direction. This first began to occur\nintermittently, then finally the needle just stopped moving while turning\nthe antennas. I have checked the wiring at both ends and all seems in order.\nI am really hoping to avoid having to tear down the rotor, so any\nsuggestions on trouble shooting from \"outside the case\" would be greatly\nappreciated.\n> Thanks much.\n> \n> Craig\n> N6RSX\n> \n> \n> \n> NOTICE: This communication may contain privileged or other confidential\ninformation. If you are not the intended recipient of this communication, or\nan employee or agent responsible for delivering this communication to the\nintended recipient, please advise the sender by reply email and immediately\ndelete the message and any attachments without copying or disclosing the\ncontents. Thank you.\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n \t\t \t   \t\t  \n\n",
    "attachments": []
}