Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/MD7XEMCACFJTERIS65VPU6ZHQWUJKJ52/?format=api
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/MD7XEMCACFJTERIS65VPU6ZHQWUJKJ52/?format=api", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api", "message_id": "[email protected]", "message_id_hash": "MD7XEMCACFJTERIS65VPU6ZHQWUJKJ52", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PIEBFQCHMX2OEHX43NVJ2FQEHZWOARWI/?format=api", "sender": { "address": "vk3jed (a) gmail.com", "mailman_id": "e049fcabdd4648088cd7ce227ab7c655", "emails": "https://mailman.amsat.org/hyperkitty/api/sender/e049fcabdd4648088cd7ce227ab7c655/emails/?format=api" }, "sender_name": "Tony Langdon", "subject": "[amsat-bb] Re: SO-67", "date": "2009-11-08T19:34:13Z", "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PIEBFQCHMX2OEHX43NVJ2FQEHZWOARWI/?format=api", "children": [], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "At 01:45 AM 11/9/2009, Dave Marthouse wrote:\n>Just for fun I attempted to hear SO-67 on the 1416UTC pass this \n>morning. It was orbit 790 with a max elevation of 79 degrees. I \n>was using my TH-F6A with stock rubber duck antenna. A few minutes \n>into the pass out of the noise came the signal. For this minimal \n>setup signals were rather strong. I knew I would have no problem \n>hearing the bird with my crossed yagis on the tower but I wanted to \n>see how I could push the minimalist envelope with just a stock \n>ht. I was pleasantly surprised with the strong \n>signals. Congratulations to amsat sa etc on a fine new addition to \n>the amateur satellite service.\n\nSounds like the South Africans have continued their tradition of good \nbirds with solid downlinks. I haven't yet worked SO-67, still have \nsome antenna issues, but I have fond memories of the last South \nAfrican bird - SO-35. :)\n\n73 de VK3JED / VK3IRL\nhttp://vkradio.com\n\n", "attachments": [] }