Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/MDE53FVJ3HYZOAMTKB4HPFLZJBAJTNZZ/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "MDE53FVJ3HYZOAMTKB4HPFLZJBAJTNZZ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/2MA2DAL7TO6JE4RP2SMYONRY4YS6GR6X/?format=api",
    "sender": {
        "address": "seb (a) wintek.com",
        "mailman_id": "334792c18f7f4268a405ca1814e93bd0",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/334792c18f7f4268a405ca1814e93bd0/emails/?format=api"
    },
    "sender_name": "Stephen  E. Belter",
    "subject": "[amsat-bb] Re: G5500 az el issue resolved!",
    "date": "2011-07-27T13:11:53Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/BZFY7HHG64KNLRRXOYWLH43AUUHCQ3FH/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Jeff,\n\nI replaced the meter bulbs in my G-5400B once, only to be disappointed that they burned out relatively soon.\n\nI have now put two white LEDs above each meter.  From memory, I put two LEDs and a current limiting resistor (about 1 Kohm) in series and connected it to the 12 volts for the bulbs, one set above each meter.\n\nI sent you a picture by separate e-mail.\n\n73, Steve N9IP\n--\nSteve Belter\n\n\n Thanks to all for the refresher on the 5500 repair. I replaced the 17806P (which I think has a 6v output)  with a 7805. This fixed the problem. I had to recalibrate as my max readings in the SatPC32 rotor calibration routine dropped because of the assumed lower output voltage of the 7805 regulator. I could only get a max azimuth reading of 206, somewhat less than the 255 needed, but this seems to work ok. \n \n Does anyone know a source for a replacement bulb in the display? Both my bulbs are burned out and I would like to replace them with something I can obtain locally. Thanks again for all the help...\n\n73 Jeff kb2m\n  \n\n_______________________________________________\nSent via [email protected]. Opinions expressed are those of the author.\nNot an AMSAT-NA member? Join now to support the amateur satellite program!\nSubscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n\n",
    "attachments": []
}