Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/NLVFLZ7LLMYWFRA5VQFRYPIIQ47MCIR2/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAJCSnOa+vE0kpDUbgjOuzU-HfatQh7k6+-6=q4NDi+ARWaRcsg@mail.gmail.com",
    "message_id_hash": "NLVFLZ7LLMYWFRA5VQFRYPIIQ47MCIR2",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/NLVFLZ7LLMYWFRA5VQFRYPIIQ47MCIR2/?format=api",
    "sender": {
        "address": "scott23192 (a) gmail.com",
        "mailman_id": "120e10e05ba14969a11da0a96d21e355",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/120e10e05ba14969a11da0a96d21e355/emails/?format=api"
    },
    "sender_name": "Scott",
    "subject": "[amsat-bb] \"Reverse\" bias-tee ??",
    "date": "2017-11-26T20:02:39Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/3PZGQCUCSGPZFBRQVGNOAV6Z2TLIAJYM/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi everyone.\n\nThe schematic makes me think \"yes\", but I wanted to check before making a\npurchase.\n\nNormally a bias-tee is used to inject a DC voltage onto your coax to power\na pre-amp.  Since some pre-amps aren't powered off the coax, but rather\nfrom a separate pair of pins, I was wondering if you can use a bias-tee AT\nTHE PRE-AMP to extract the DC voltage off our coax for connection to those\nexternal power pins on the pre-amp?\n\nRunning a separate cable to power the pre-amp is not the end of the world,\nbut it would be convenient if I could turn on the bias voltage available on\nthe Airspy or RTL-SDR and then extract it up at the antenna to power a\npre-amp.\n\nThanks for any recommendations!\n\n-Scott,  K4KDR\n",
    "attachments": []
}