Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/NNUJFJPWPNOEHHJSD2D6XGIYYV7ZCBD3/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "NNUJFJPWPNOEHHJSD2D6XGIYYV7ZCBD3",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/Z6UHNZVAV4ZAWJLRGYRAPTTYKUGFWVA6/?format=api",
    "sender": {
        "address": "ka3hsw (a) att.net",
        "mailman_id": "afface7d7e8049fda539552165bdde78",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/afface7d7e8049fda539552165bdde78/emails/?format=api"
    },
    "sender_name": "George Henry",
    "subject": "[amsat-bb] Re: Rotor Controller Info Needed.",
    "date": "2008-07-11T19:00:23Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/XDOX2FIBIJVS7JWDCBS5LMLWUZJBBYKL/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Michael:\n   \n  The FODTrack boards are available from Far Circuits http://www.farcircuits.net , or I might still have an extra one left at home from the custom batch I had them run off, before they started offering them.  I also have one of the ARRL Sat Tracker 688 boards, instruction/driver CD, and all necessary parts except a case.  I probably could let that go, just gotta figure out for how much $$....\n   \n  73,\n   \n  George, KA3HSW\n   \n  \n\nAngus <[email protected]> wrote:\n  Hi Michael,\nnot 100% sure if its compatable but works fab here with my rotators, try a \ngoogle for FODTRACK.\n100% homebrew works really well.\nregards\nGus M0IKB\n----- Original Message ----- \nFrom: \"Michael Baker\" \nTo: \nSent: Friday, July 11, 2008 5:52 AM\nSubject: [amsat-bb] Rotor Controller Info Needed.\n\n\n> Hello gang,\n> I am in process of putting together a ground station for AMSAT use\n> and I have acquired a Yaesu 5400 rotor system with a pair of older \n> Cushcraft\n> antennas. I now need a controller box to go between the PC and the rotors. \n> I\n> checked the price of the GS-232B by Yaesu and nearly had heart failure! \n> Then\n> I looked at the schematic and was appalled! Surely someone has come up \n> with\n> a better/cheaper solution. Searching the web only produced a few build \n> from\n> scratch articles and a fellow from Europe selling a board. Isn't there \n> some\n> other alternative available off the shelf and reasonably priced?\n>\n> Michael Baker K7DD\n> [email protected]\n>\n>\n",
    "attachments": []
}