Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/NVCQWXSCM55XZURUFZZUQTLH3UIHONEE/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "001001c6cb3b$4e4bfe70$93357ad5@home",
    "message_id_hash": "NVCQWXSCM55XZURUFZZUQTLH3UIHONEE",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/NVCQWXSCM55XZURUFZZUQTLH3UIHONEE/",
    "sender": {
        "address": "Mikehooles (a) BTInternet.com",
        "mailman_id": "7e2791a0e4344cbb8b4c96649181e5ae",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/7e2791a0e4344cbb8b4c96649181e5ae/emails/"
    },
    "sender_name": "Mike Hooles",
    "subject": "[amsat-bb]  Re Working FO-29 with Omnis.",
    "date": "2006-08-29T07:18:03Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi folks,\nWork all LEO's all modes, down to 1 degree above the horizon, including \nFO-29 with simple antennas.\nOn 2 metres I use an MFJ 5/8 ground plane for uplink and downlink passes up \nto 30 degrees, and switch to an eggbeater on overhead passes.\nFor 70cms I use two 3 element beams, one verticallly polarised and the other \nhorizontal. for overhead passes I use an eggbeater, again switched with a \ngood 3 way unit.\nUplink power is 100 watts.\nI have preamps at the switching point and on the output of the radio a \nNES10-2 DSP unit which for white noise gives me another 6 -10dB advantage.\nI do, however, only have  5meter cable runs of RG213 from the antennas to my \ngear.\nIn the area in which I live large antennas are a no- no,\n\nRegards\nMike G3LGR \n\n",
    "attachments": []
}