Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/NZRN3HV6FUOW2NWF6L5HYH47NXHY6VAX/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "01e901c89f40$071c7d10$6701a8c0@sierrap4dual",
    "message_id_hash": "NZRN3HV6FUOW2NWF6L5HYH47NXHY6VAX",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/NZRN3HV6FUOW2NWF6L5HYH47NXHY6VAX/",
    "sender": {
        "address": "jkopala (a) gmail.com",
        "mailman_id": "083d74d034614b08876fb7affa0a2348",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/083d74d034614b08876fb7affa0a2348/emails/"
    },
    "sender_name": "John Kopala",
    "subject": "[amsat-bb] Re: SatPC32 and ICOM 910H question",
    "date": "2008-04-15T21:31:10Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Ron,\n\nFirst make sure that you have selected VO-52 and it is the currently active \nsatellite.  The satellite you have selected will be listed on the top bar of \nthe program window and highlighted on the screen.\nNext click on CAT in the menu bar to open the CAT Tuning window.  The window \nshould display one line, \"135900/435250 USB/LSB\"\nClick on the C-, which changes to C+, just below your QTH location in the \nupper left, for CAT operation.\nI suspect you are already doing all of this correctly.\nWhen you put SATPC32 into CAT mode (C+) for VO-52, the following should \nhappen:\n-  The IC-910H should switch to Normal satellite mode.\n-  The Upper band on the radio should switch to VHF, USB, 145,900,000 minus \ndoppler correction (assuming rising satellite).\n-  The Lower band on the radio should switch to UHF, LSB, 435,250,000 plus \ndoppler correction.\nCheck the last 3 items before proceding.  I sometimes have to repeat the C+, \nC-, C+ steps before the radio and SATPC32 synch up.\n-  When you key the microphone, the lower UHF band should transmit - VO-52 \nis U/v, UHF uplink, VHF downlink, opposite of AO-51...\n-  While transmitting, you can adjust the uplink or the downlink in the CAT \nwindow to get the pair tuned properly.\nOnce that is done, you can tune up and down the translator bandwidth to find \nother stations.\n\nI hope this helps.  If not email me directly with a step by step discription \nof what is happening.\n\nJohn Kopala\nN7JK\n\n\nFrom: Ronald Nutter <[email protected]>\nSubject: [amsat-bb]  SatPC32 and ICOM 910H question\nTo: [email protected]\nMessage-ID: <[email protected]>\nContent-Type: text/plain; charset=ISO-8859-1; format=flowed\n\nI am trying to learn how to use SatPC32 for Doppler correction on the\nSSB birds.  I have run into a \"brick wall\" in terms of how it is\noperating that is giving me some fits.\n\nWhen I put SatPC32 into CAT mode, the radio shifts into the appropriate\nfrequencies but it wont transmit on the right band.  When I press the\nM/S to swap the displays around so that it will transmit on the correct\nband, the radio stops adjusting to what is shown on the SatPC32 display.\n\nCan someone point out what I am doing wrong or do I need to change to\none or more of the config files in SatPC32 ?\n\nThanks,\nRon\nKA4KYI\n\n",
    "attachments": []
}