Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PPS6OR63OIBX3354BW4FTL5MHP7QKOFA/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "PPS6OR63OIBX3354BW4FTL5MHP7QKOFA",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PPS6OR63OIBX3354BW4FTL5MHP7QKOFA/?format=api",
    "sender": {
        "address": "w3ab (a) yahoo.com",
        "mailman_id": "460885d5cb8b4383aa368244120c3868",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/460885d5cb8b4383aa368244120c3868/emails/?format=api"
    },
    "sender_name": "GEO Badger",
    "subject": "[amsat-bb] 2M RX preamp for sale",
    "date": "2019-05-07T18:52:45Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "MiniKits.com.au 2m 144MHz VHF RX/TX Preamplifier\nThis product is ideal for use with the Icom Multimode VHF transceivers including the IC-275, IC-820/821, IC-910H and IC9100 that have a PREAMP enable switch to supply +12vdc out of the antenna connector in RX mode. Transceivers without this function will require an external bias tee like the Mini-Kits EME168-2-70 to supply DC power up the coaxial cable. When using a high power RF amplifier up to 500 Watts, additional sequencing will be required to protect the pre-amplifier from damage. The Mini-Kits EME166 Sequencer can be adapted to be used for correct sequence timing of the RX to TX changeover.\nThis unit is peaked for 145.800 MHz and mounted in a Nickel sprayed GME enclosure. It was used once for an ISS contact.\n$100.00 USD OBO. Buyer pays S&H.\nSpecifications Frequency Range:Band Pass: 140 to 150MHz (BW 10MHz @ 1dB)Band Rejection: Typically 40dB @ 50MHz, 60dB @ 430MHz Gain Adjustable: Typically +18dB Max, 10dB Min @ 145MHz Noise Figure: 0.8dB ( Typically <0.7dB @ 145MHz)Through Loss: 0.05dB @ 145MHz (Bypass Mode)RF Power Handling: 100W CW (Un-Sequenced ) 500W PEP (Sequenced)Minimum RF Input: +20dBm (100mW) To activate the RF sensing circuitOperating Voltage: +11 to 15vdc (+12vdc @ 150mA Recommended)Board Size: 80mm L x 84mm W x 25mm H (with BNC connectors)\n\n---  \n Ciao baby, catch you on the flip side.    \n GEO     \n\n http://www.w3ab.org\n\nTime flies like an arrow, fruit flies like a banana.\n",
    "attachments": []
}