Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PWZVW6GZJFH3BE3POLRBNMTXR3LIARZ7/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "CAF3DnKgJ0HJT2K8V277VQTCu14yoVo_C5cROW8Up8p4=n2sDtw@mail.gmail.com",
    "message_id_hash": "PWZVW6GZJFH3BE3POLRBNMTXR3LIARZ7",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/5JMYYJZSDR7KXA7C2TDLC5IYKXCTRZ6L/",
    "sender": {
        "address": "dan (a) post.com",
        "mailman_id": "8fbd55eb51ed4663a4067933c1d26387",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/8fbd55eb51ed4663a4067933c1d26387/emails/"
    },
    "sender_name": "Daniel Cussen",
    "subject": "Re: [amsat-bb] satpc32 port problem",
    "date": "2015-01-16T11:51:49Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/5JMYYJZSDR7KXA7C2TDLC5IYKXCTRZ6L/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "On 12/01/2015, Scott Smith <[email protected]> wrote:\n> Tnx for the reply folks. I using the Kenpro G5400a rotor system and noticed\n> my  \"elevation\" rotor has stopped working. Wonder if this has anything to do\n> with it?.\n\nIf it does not work with the \"UP\" \"DOWN\" switches on the control box\nthen it is not a com port problem. Even with no feedback the up/down\nswitches should move the elevation. Check for cabling problems and\nmeasure the AC voltage coming out of the back of the controller,\nassuming the rotator is difficult to access. There are user manuals\nonline that show which pinouts.\n\nwith a meter on ac voltage you should measure about 20 volts from E4\nand E6 when moving down and 20 volts between E5 and E6 when moving up.\n\nFor comparison check the azimuth A4 to A6 and A5 to A6\n\nhttp://www.yaesu.co.uk/files/G-5500%20Operating%20Manual_a.pdf\nsee page 11\n",
    "attachments": []
}