Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/QTLIRXJJ4TKJNNKENH67LKGQ3CC7VMTO/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "QTLIRXJJ4TKJNNKENH67LKGQ3CC7VMTO",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/QTLIRXJJ4TKJNNKENH67LKGQ3CC7VMTO/?format=api",
    "sender": {
        "address": "ve8rt (a) yknwt.ca",
        "mailman_id": "719ed984cb59438e9a7f3c6e3d9c84f3",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/719ed984cb59438e9a7f3c6e3d9c84f3/emails/?format=api"
    },
    "sender_name": "Ron VE8RT",
    "subject": "[amsat-bb] analog the hard way",
    "date": "2018-08-19T20:42:26Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/7FZRW3M7OGJAI67IOUGASGAZRILOR6FZ/?format=api",
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/M5UEIDVKKAHJSHZ55JVVR5AUDRH7MWDQ/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "  Fortunately I'm far enough north that I can work at, and mess up a\nbit, getting into the analog sats while I have the footprint all to\nmyself for part of some passes.\n\n  Making slow progress, I've been working at this for a long time,\ngetting back on the satellites.  Trying to do it with older equipment\nis challenging.\n\n  The radio is a FT-726R (no CAT provision) so Doppler correction is\nmanual.  The antenna pair are a helix on 435 and 8 element quad on 2M.\non a 10M (33 ft) tower.  Elevation is fixed at about 25 degrees,\nrotator is Ham IV (I need to move the rotator controller closer - it\nweighs less than the radio).  I can copy, without preamps, satellites\non both bands down to about 1.5 degrees above the horizon.\n\n  Software is GPredict (OS is Elementary, Linux).\n\n  Yes, lots of complications as I can't manage everything fast enough,\nso I'm looking to simplify things one at a time.\n\n  First, I need to get the actual Doppler shift info up on a screen as\nI must enter is manually.  Using the Doppler per 100MHz shown on\nGPredict which a calculator to set the radio works but is far from\npractical.  I'd like to bring up actual Uplink, Downlink Doppler on the\nscreen, but it hasn't been evident how to do that.  GPredict maybe\nisn't the right solution, as I remember it was available in the DOS\nInstant Track.\n\n  Then maybe an Arduino controller for the antenna pointing.\n\n  With better organization of the shack I think it would work.  The\nlonger term goal is to get familiar with digital satellites.\n\n  I'd like some help, starting maybe with the Doppler display problem.\n\n  Thanks,\n\n         Ron VE8RT in DP22\n\n-- \nRon VE8RT <[email protected]>\n",
    "attachments": []
}