Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RAFUOPAUEZ6JRQX5BUHW44OTWBWVZKIV/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "RAFUOPAUEZ6JRQX5BUHW44OTWBWVZKIV",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/RAFUOPAUEZ6JRQX5BUHW44OTWBWVZKIV/",
    "sender": {
        "address": "pa3guo (a) upcmail.nl",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "PA3GUO",
    "subject": "[amsat-bb] SATPC32 & FT-817: CAT Delay ?",
    "date": "2017-08-02T20:03:14Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "My set-up:\n\nWindows 10 & SATPC32: works perfect with TS2000 (CAT delay 20)\n\nNow I want to connect my FT817: via a Bluetooth Dongle.\nPairing to the PC successful.\n\nNow letting SATPC32 control the FT817:\n\n- started with CAT delay 20: works kind off, downlink (RX VFO A): OK,\nuplink (TX/VFO B): frequency not correct\n\n- increased CAT delay (5, 10, 20, 30, 50, 60, ....110): effects start\nto vary but never OK\n   + at some delays flipping between VFO A and B without pressing PTT\n   + freq of VFO A and B continue to be wrong \n   + often in RX VFO B is selected, pressing PTT VFO B (should be the\nother way around) \n\nTried at CAT rates 9600 and 38400, no differences.\n\nSeems like a timing problem to me, as there is influence of the CAT\ndelay setting.\n\nOfficial recommendation: CAT RATE 38400, CAT delay 110. (that does not\nwork though)\n\nA friend has similar problem, when using a wired USB interface between\nPC and FT-817.\n\nWho has some tips for us ?\n\nHenk, PA3GUO\n\n\n\n\n\n",
    "attachments": []
}