Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RG2G7QO3J3LPIHYTZFIG76H2Z2WZSNVD/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "005401ca262e$a25c9cd0$e715d670$@com",
    "message_id_hash": "RG2G7QO3J3LPIHYTZFIG76H2Z2WZSNVD",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/HYRGCLXAZODKDSTH2JXBVKGRIT2DOYY3/?format=api",
    "sender": {
        "address": "howard (a) howardlong.com",
        "mailman_id": "82a1d3d58c6f48898b755d208f81930e",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/82a1d3d58c6f48898b755d208f81930e/emails/?format=api"
    },
    "sender_name": "Howard Long",
    "subject": "[amsat-bb] Re: Alinco DJ-G7T programming cable",
    "date": "2009-08-26T09:21:45Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/HYRGCLXAZODKDSTH2JXBVKGRIT2DOYY3/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/7SLGYOAC67UYIPAKCPOKWU67PQPRR5AS/?format=api",
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/THNH73SJSBCDOKP3KYUSXRIM3Q72WALJ/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "FWIW, Drew and I ran two DJ-G7's in full duplex mode into a comms tests set,\none was Drew's very early model and mine was a more recent model. We also\ntook the opportunity to test a TH-D7.\n\nWe ran the tests using AO-51's uplink and downlink frequencies. Drew has the\nactual figures, but as I remember it they were like this:\n\nEarly DJ-G7 15dB desense\nLater DJ-G7 5dB desense\nTH-D7 1dB desense\n\nThe test involved adjusting receive signal power until we had a 12dB SINAD\nmeasurement, first without transmitting then while holding the radio's PTT.\n\n73, Howard G6LVB\n\n-----Original Message-----\nFrom: [email protected] [mailto:[email protected]] On\nBehalf Of Alan P. Biddle\nSent: 17 August 2009 20:49\nTo: AMSAT-BB\nSubject: [amsat-bb] Alinco DJ-G7T programming cable\n\nHi,\n\nSometime back, while my rig was on back order, I asked if anyone had used\nIcom programming cables with it.  My rig finally arrived, as did shortly\nthereafter new firmware and most recently a memory cloning program.  With\nthat, I have been able to test both the Icom OPC-478 and the RT Systems\nCT-29A cables.  (Both need a stereo 3.5 mm to 2.5 mm adapter, plus the\nEDS-10 adapter which breaks out the Alinco connector to separate microphone\nand earphone connectors.)  In both cases, I have found that they work\nperfectly for both memory management and firmware upgrade.  If you already\nhave a similar cable, you can probably get by with a $4 adapter from RS\nrather than a new $55 cable.\n\nUnfortunately, the DJ-G7T is not so far proving to be an adequate satellite\nrig, but that is another issue.\n\n\nAlan\nWA4SCA\n\n\n_______________________________________________\nSent via [email protected]. Opinions expressed are those of the author.\nNot an AMSAT-NA member? Join now to support the amateur satellite program!\nSubscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n\n\n",
    "attachments": []
}