Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RLRJDXRRL7B6FXHXF4COC376K5RDP7W7/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "!&!AAAAAAAAAAAYAAAAAAAAALOHmVcdJi1EheJQOJNGHQ4igQAAEAAAALWM55pQHVpIu8P39ooL+L0BAAAAAA==@N3UJJ.COM",
    "message_id_hash": "RLRJDXRRL7B6FXHXF4COC376K5RDP7W7",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/RMMCQJL3VTWENYFJRDH777BYL5NSPSMV/?format=api",
    "sender": {
        "address": "N3UJJ (a) N3UJJ.COM",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "N3UJJ",
    "subject": "[amsat-bb] Re: Icom IC-910H CI-V USB cable",
    "date": "2008-08-25T18:35:23Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RMMCQJL3VTWENYFJRDH777BYL5NSPSMV/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": ">From the following group (I'm using one on my 910H and one on my 746Pro):\n\nFrom: cpu_nut [email protected]\nSubject: [IC-7000] USB CI-V cable alternative, tested-working on IC-7000\nTo: [email protected]\nDate: Thursday, June 19, 2008, 7:45 PM\n\nI am into scanning and thought to try my Radio Shack / GRE USB serial cable\non the IC-7000 with Ham Radio Deluxe. ** It works great! ** \n\nI know the person who designed the cable and apparently it is a half or full\nduplex cable (RTS switchable) with baud capability into the 100s of\nthousands of kb/s so it is plenty fast. Its output to the radio is only\n3.3V, but its input is ESD protected at 6V so it will not load the radio's\noutput. One thing that is nice is that it has red/green LEDs for TX/RX\nserial data so you can see it working. It uses the well respected FTDI chip\nwhich has drivers on  <http://www.ftdichip/> http://www.ftdichip\n.com/FTDrivers. htm for most operating systems. \n\nThe only inconvenience is the angled 18\" jack which works great on the\nscanner, but not as well on the Icom. \n\nThe 1/8\" jack is stereo for full duplex mode, but in half duplex mode only\nthe tip is used. With Ham Radio Deluxe I just left the RTS box unchecked to\nkeep the cable in half duplex mode.\n\nApparently the IC-7000 has no problem with the 3.3V (5V is Spec) signal,\nwhich is not surprising, as the switching threshold would be 0.7V or about\n2.2V depending if the radio's input is TTL or CMOS.\n\nI'll be curious as to others experience with using this cable on CI-V.\n\nThe price is right too:\nRadio Shack 20-047\n <http://tinyurl.com/3ez9p7> http://tinyurl.com/3ez9p7\n\nGRECOM 30-3290\n <http://tinyurl.com/48h7jl> http://tinyurl.com/48h7jl\n\n \n\n \n\n-----Original Message-----\nFrom: [email protected] [mailto:[email protected]] On\nBehalf Of Kostas Ioannidis\nSent: Monday, August 25, 2008 13:53\nTo: [email protected]\nSubject: [amsat-bb] Icom IC-910H CI-V USB cable\n\n \n\nHi all!\n\n  I need to connect my 910 to the pc via the usb port for auto doppler\n\ncorrection. Do you know where I can find a usb cable at the internet (\n\ne-shop or ebay) which works with Ham Radio Deluxe under XP?\n\n \n\n  73 de sw1ixp,Kostas Ioannidis\n\n_______________________________________________\n\nSent via [email protected]. Opinions expressed are those of the author.\n\nNot an AMSAT-NA member? Join now to support the amateur satellite program!\n\nSubscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n\n",
    "attachments": []
}