Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RMKUEZN36B7B73T6KTLKC6JDUABJJD4F/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "RMKUEZN36B7B73T6KTLKC6JDUABJJD4F",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/H4TZJVTBTCCUW5TI6E2CKB3WHC7CD4IT/?format=api",
    "sender": {
        "address": "seb (a) wintek.com",
        "mailman_id": "334792c18f7f4268a405ca1814e93bd0",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/334792c18f7f4268a405ca1814e93bd0/emails/?format=api"
    },
    "sender_name": "Stephen  E. Belter",
    "subject": "Re: [amsat-bb] CAT control for TX and RX",
    "date": "2014-06-21T19:08:40Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ATPXGVT2XTSUHNJBLQBEZDBYJ3FX4OHA/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PYP3DAU5WDO4HNHSMEXOWCLMHOTWS7VU/?format=api",
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/OUF3RLVYOL7LERVVQTGT2WOJPOKZNZSN/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Tom's article was very helpful.  It can be found at:\nhttp://www.tomdoyle.org/FUNcube-SatPC32/FUNcube-SatPC32.html\n\n73, Steve N9IP\n--\nSteve Belter, [email protected]\n\n\n\nOn Jun 21, 2014, at 2:54 PM, \"Hector, CO6CBF\" <[email protected]> wrote:\n\n> Hello guys!\n> \n> I have been running full computer control with a FCD Pro+, HDSDR, SATPC32\n> V12c and a FT-817nd.\n> \n> SATPC32 controls HDSDR and the FT-817, It runs Doppler correction on both.\n> When I click the HDSDR `s waterfall, SATPC32 sets the proper frequency in\n> the FT-817nd. It works great!\n> \n> The FCD Pro+ has a great rejection on the 70cm band. You can run\n> full-duplex, even running 50W on 2m. It is a wonderful receiver!\n> \n> Thomas Doyle, W9KE wrote a great article explaining how you can get the\n> FUNcube Dongle working with SatPC32 to operate full duplex on linear\n> satellites using the FCD and a conventional radio.\n> \n> I am sorry, I don't have the link for that. You might do a Google search on\n> FUNcube <==> SatPC32.     \n> \n> 73!\n> \n> Hector, CO6CBF / KF5YXV\n> \n> \n> -----Mensaje original-----\n> De: [email protected] [mailto:[email protected]] En nombre\n> de Stephen E. Belter\n> Enviado el: Saturday, June 21, 2014 09:15\n> Para: Stu2\n> CC: [email protected]\n> Asunto: Re: [amsat-bb] CAT control for TX and RX\n> \n> Yes.  For example, SatPC32 will control two radios and run Doppler\n> correction on both.  The receiver can be HDSDR.\n> \n> In my case, I'm using SatPC32 to control HDSDR with a FUNcube Dongle Pro+\n> and an Icom IC-821.\n> \n> 73, Steve N9IP\n> --\n> Steve Belter, [email protected]\n> \n> \n> \n> On Jun 21, 2014, at 7:32 AM, Stu2 <[email protected]> wrote:\n> \n>> I'm preparing for Field day and would like to use a combination of \n>> HDSDR\n>> (RX) and a Kenwood TS-2K (TX) radio. The RTL-SDR dongle and preamp \n>> make a great RX. Ham Radio Deluxe only connects to a single radio. \n>> (Transceiver)\n>> \n>> Is there a way to control both radios at once to correct for Doppler? \n>> \n>> The problem would be similar to controlling two FT-817s, except both \n>> radios would be different in my case.\n>> \n>> Thanks and 73's\n>> \n>> Stu2\n>> W7IY\n>> _______________________________________________\n>> Sent via [email protected]. Opinions expressed are those of the author.\n>> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> \n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> \n\n",
    "attachments": []
}