Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RNJBPH6CRMTEEBSLX27UUXT7M6F3GYKA/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "25162334.105421286572184607.JavaMail.defaultUser@defaultHost",
    "message_id_hash": "RNJBPH6CRMTEEBSLX27UUXT7M6F3GYKA",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/RNJBPH6CRMTEEBSLX27UUXT7M6F3GYKA/",
    "sender": {
        "address": "oh8mbn (a) suomi24.fi",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Mika Siira",
    "subject": "[amsat-bb]  AO-7 mode A experieces from KP35",
    "date": "2010-10-08T21:09:44Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hello folks,\n\nI have been mostly mode B user on AO- 7 satellite but \ntoday I decided to try mode A  from my summer QTH. I have two\nantennas \nfor downlink (vertical and Spiderbeam with four elements for 28MHz) and \nno problems for receiving signals from the sat. Of course because of \nthe polarsation change switching between these antennas during the pass \ngives best results.\nFor the uplink I have used FT-817 (5w power) to 9-\nelement yagi, unfortunately SWR is high above 145MHz. On every pass  \nthat I tried today I have heard my own signal on downlink (weak but \nheard).\nWhat is the recommended power level for mode A (if there is \none)? From my previous visits to my summer QTH I have heard some \njapanese stations and satations from stateside, so this mode would be \nworth to try. On mode B from my city location\n5-15 watts is well \nenough. What kind of antennas people are using on mode A?\n\nMika, OH8MBN\n\n",
    "attachments": []
}