Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RQLZYSM7ZILYVBGEUBB6X7L2JKNHOJRU/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "001c01c890bd$75de49e0$4001a8c0@MainPC",
    "message_id_hash": "RQLZYSM7ZILYVBGEUBB6X7L2JKNHOJRU",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/LPNUTKGHWXJYIY2CUB4TFTL4LLTNEH5R/",
    "sender": {
        "address": "g7hia (a) btinternet.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "john heath",
    "subject": "[amsat-bb] Re: Easy to make, low cost omni-directional  antennae",
    "date": "2008-03-28T10:21:16Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/2RWAGLDS7AW2IL7YTOSJNNVJE5EJ4K7W/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi,\n\nI don't have the test data but confirm the excellent receive performance of \nthe Lindenblad with the 70cm downlink satellites.\nThe first one I made was using the classic  4x folded dipole method as shown \nin Satellite Experimenters Handbook by K2UBC.\nMade a wooden jig so that all the folded dipoles were the same. Worked well, \nbut was tricky to build due to the phasing harness.\n\nThe second one was Tony AA2TX's design which he described as a Parasitic \nLindy. No phasing harness and much easier to build.\nWith a good pre amp (a kit from G0MRF) I could copy the 80mW cubesat beacons \nat 1 degree elevation.\n\nLO-19 beacon was very strong at low elevation with no pre amp and just a 2 \nmeters of co-ax into an FT817.\n\n73\n\nJohn G7HIA \n\n",
    "attachments": []
}