Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RXMAKUFS3DECP2CDUZJH2SSWQ2WRNMAP/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "07c601d0ffb4$8a6ed5a0$9f4c80e0$@net",
    "message_id_hash": "RXMAKUFS3DECP2CDUZJH2SSWQ2WRNMAP",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/GO4KECDHWBIKO75OFDKZ2BQ2K27JPFVJ/?format=api",
    "sender": {
        "address": "kb2m (a) arrl.net",
        "mailman_id": "a9e21a68ea694587a3f7c02f0f3d12dd",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/a9e21a68ea694587a3f7c02f0f3d12dd/emails/?format=api"
    },
    "sender_name": "[email protected]",
    "subject": "Re: [amsat-bb] HDSDR SDRplay 817 issue",
    "date": "2015-10-05T21:26:26Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/2RV2FRJDFSBALA4IUPJVNERAWUIXR2ZO/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "\tHi Erich, I hope all is well with you, all is good here. Thank you!\n I knew it had to be something stupid I was missing. I was using the DDE to\nHDSDR because it lists SatPC32 there, as there is no available doc\nexplaining all this, and it seemed to work with the FM birds it had me\nstumped. I switched to CAT to HDSDR and all is acting like you said. Thanks\nagain.....\n\n73 Jeff kb2m\n\n\n-----Original Message-----\nFrom: Erich Eichmann [mailto:[email protected]] \nSent: Monday, October 05, 2015 14:03 PM\nTo: [email protected]; [email protected]\nSubject: Re: [amsat-bb] HDSDR SDRplay 817 issue\n\nJeff,\nhere Doppler correction and frequency tuning works flawlessly with FM and\nSSB sats.\nMy setup:\nSatPC32:\nRadio 1 (FUNCube Dongle Pro +):  TS-2000, COM  5, Baudrate 57600, CAT delay\n20 Radio 2: FT-817, COM 12 (USB-to-Serial), Baudrate 38400\n\nHDSDR, menu Options:\nCAT to HDSR (important, don't choose DDE to HDSDR ), COM 6, Baudrate 57600\nItem \"activated\" checked\n\nCOM 5 and 6 are linked virtual Ports, generated with VSP Mgr.\n\nFrequency tuning of HDSDR and FT-817 by SatPC32 via the 5 controls or the\ndirection keys up/down and right/left works (SatPC32 must be the active\nprogram - blue headerline) Frequency via HDSRD works also, SatPC32 and the\nFT-817 follow.\n\nYou cannot QSY via the FT-817's VFO since it is the TX radio.\n\n73s, Erich, DK1TB\n\n\n\nAm 05.10.2015 um 13:21 schrieb [email protected]:\n>   After some OTA time what I'm finding out is that my setup here works \n> only with FM sats. SO-50, CAS-3H, and NO-84(with the FM d/l). All of \n> the linear birds do not work. What happens with the linear birds is \n> when you first initialize them upon AOS the frequencies change \n> correctly at the start of pass but after that there is no Doppler \n> correction on the 817, or frequency manipulation with SatPC32's Cat \n> tuning drop down box. With the FM birds all of this works correctly.\n>   If someone actually has this setup working with the linear birds I \n> would like to see your exact configuration. Either I'm missing \n> something not so obvious, or there is a s/w bug, possibly in HDSDR.\n>\n> My setup...\n>\n> FT-817ND\n> SDRplay\n> SatPC32 ver 12.8c\n> HDSDR 2.70\n>\n>\n> 73 Jeff kb2m\n>         \n>\n> -----Original Message-----\n> From: AMSAT-BB [mailto:[email protected]] On Behalf Of \n> Clayton W5PFG\n> Sent: Sunday, October 04, 2015 16:31 PM\n> To: [email protected]\n> Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue\n>\n> Yes, I use VSP with HDSDR to full integrate with SatPC32 successfully.\n>\n> Make sure radio 2 is set to the proper radio type in SatPC32 for the\nFT-817.\n> Use radio 1 for the CAT interface to HDSDR. It will appear as a \n> Kenwood TS-2000.  You will need to activate CAT in HDSDR for it to work.\n>\n> I have used this setup many times for a full automated SDR station on \n> the satellites with a FUNcube Dongle Pro + and FT-857D.\n>\n> 73\n> Clayton\n> W5PFG\n>\n> On 10/4/2015 13:40, [email protected] wrote:\n>> I'm trying to get HDSDR and SatPC32,  to play nicely with  HDRplay \n>> and an FT-817. I have the HDSDR working with SDRplay like Patrick has \n>> demonstrated on here and I'm trying to complete the setup for an \n>> fully\n> automated system.\n>> I'm trying to get the setup working to the point that if I change the \n>> uplink frequency on the 817  with its physical dial the downlink on \n>> HDSDR will follow. I'm about half way there. I'm  at the point if I \n>> change the downlink frequency in SatPC32 the HDSDR display changes \n>> with it, but not the 817's uplink frequency. When I first load \n>> SatPC32 the 817's frequency changes to the correct uplink frequency \n>> but doesn't update afterwards. I'm using VSP Manager to create the \n>> VSP's I think  I'm a little confused about how this should all hook \n>> together\n> serially. Anyone have this working 100% ?\n>>\n>>\n>> 73 Jeff kb2m\n> _______________________________________________\n> Sent via [email protected]. AMSAT-NA makes this open forum available \n> to all interested persons worldwide without requiring membership. \n> Opinions expressed are solely those of the author, and do not reflect the\nofficial views of AMSAT-NA.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb\n>\n\n",
    "attachments": []
}