Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RYZJOFKOE5DQADRZVHTAHJX2RUZ2EZVJ/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "RYZJOFKOE5DQADRZVHTAHJX2RUZ2EZVJ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PP2HPQK5TDUV7FSYBQGHMCUVPE27ZHIU/?format=api",
    "sender": {
        "address": "w4as (a) bellsouth.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Sebastian",
    "subject": "[amsat-bb]  Yaesu FT-847",
    "date": "2008-11-02T17:40:07Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/RVVHHTAD3RDVNICL5TOJFE3VBR7LJPPC/?format=api",
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/6WOEHTGJYUILCMAG3NJOXMJ5E43AXIYX/?format=api",
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Z6KSIBC6LNWXGGOF6YAYDKAPYRME6M2R/?format=api",
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/XPUODMW3NXJ5V5DWPGAQ574T7GPQEZSY/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I recently acquired a Yaesu FT-847 for use primarily with satellites.   \nPreviously I used a Kenwood TS-2000, but decided to go with the 847  \ndue to the 2000's known birdies on the output of some of the FM  \nsatellites.\n\nI use Ham Radio Deluxe, but used SATPC32 on the Kenwood.  I had no  \nproblems at all with the SSB birds on the Kenwood & SATPC32.  However,  \nwith the Yaesu FT-847, I find that SATPC32 will no longer 'see' the  \nradio.  It won't place the radio into satellite mode, and it won't  \nchange the frequencies depending on the satellites I click from the  \n'shortcuts' on the bottom right.\n\nI have doubled-checked the wiring on the RS-232 cable, 5 for ground,  \nand 2 & 3 crossed (null modem cable).  I'm sure it's not the cable,  \nsince Ham Radio Deluxe can see and control the radio's frequency.\n\nI'm wondering if there is a problem with either the radio, or if there  \nis something that I need to do in SATPC32 in order to change over to  \nthe Yaesu.  Obviously under Setup, Radio Setup, I have selected Yaesu,  \nModel FT-847, Com port 1, and CAT delay of 20.  However, I don't see  \nanywhere to tell the program what the baud rate of the radio is.  I  \nhave tried 4800, 9600 and 57600 with the same lack of success.  I see  \nthere is a file called yaesupar.sqf in the directory of SATPC32,  \nhowever I can't find anything in the documentation about what, if  \nanything, needs to be entered in that file.\n\nI should also note a couple of other things.  On the rig's menu item #  \n41, for X RPT which is cross repeat, I can't change it from OFF, it's  \nstuck there, no matter what I do.  I wonder if that has anything to do  \nwith the problem.\n\nIn addition in Ham Radio Deluxe, if I use the new HRD Sat Track  \nprogram, which is a beta release, I can't connect to the radio using  \nthe IP server.  It briefly displays FT-847, and then it immediately  \ngoes away.  However, if I use Digital Master 780, which is used for  \ndigital modes, it can control the radio without any problems, so I  \nthink I have narrowed it down to a problem with SATPC32.\n\nI hope someone can help me, as I would really like to use this rig on  \nthe satellites.\n\n73 de W4AS\nSebastian\n",
    "attachments": []
}