Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/TUEYWFLLT47S4K5Y4V6WKKMWWGFMJDV5/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "00bd01cc85da$3ba251c0$b2e6f540$@net",
    "message_id_hash": "TUEYWFLLT47S4K5Y4V6WKKMWWGFMJDV5",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/S3TGTECQCZMJDYTLRO4ROEKBL3PFE6VK/?format=api",
    "sender": {
        "address": "kb2m (a) comcast.net",
        "mailman_id": "4f01ae6749a54d178a501e4efec2da0b",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4f01ae6749a54d178a501e4efec2da0b/emails/?format=api"
    },
    "sender_name": "Jeff KB2M",
    "subject": "[amsat-bb] Re: 5500 rotor problem DUH",
    "date": "2011-10-08T16:49:22Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/S3TGTECQCZMJDYTLRO4ROEKBL3PFE6VK/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I was getting ready to take my rotor down and dissemble, but decided to give\nit another test through the cable. I found that it started working. Upon\nfurther examination I found that both the Azimuth and the Elevation cables\nwere somehow severely stretched and were both intermittent at that one spot\nin the both cables. I ended up cutting a 3 foot section out of each rotor\ncable and splicing back together. I have no idea how this just manifested\nitself. I did have some major construction projects going on, new house\nbuilt, old house demolished, 25 by 50 by 20 foot septic system hole dug. All\nthis within 5 foot of my satellite array ! But after all of this it hooked\nup plug and play to the new house. Very strange, that the cable problem just\nshowed up, almost a year later. But all is once again good in kb2m satellite\noperations again. I should be back on the air this evening :-)\n Thanks to all the good debugging suggestions, I have filed them away, also\nDrew thanks for the tip on the motor compatibility with the 5500 and 450. I\nwas going to sell the 450 rotor, but will now keep for a spare..\n\n73 Jeff kb2m\n\n\n",
    "attachments": []
}