Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/UN3VMVKD76A6ATTTEQIZDB4Y6BTKWELZ/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "135931DE866B4DC198CBCBC967A27602@name90360d0545",
    "message_id_hash": "UN3VMVKD76A6ATTTEQIZDB4Y6BTKWELZ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/BE5EGGYZXVPV2GEXILDTQDJEBRWEYURN/?format=api",
    "sender": {
        "address": "erich.eichmann (a) t-online.de",
        "mailman_id": "6679c7cde510458f8117afd8289f9948",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/6679c7cde510458f8117afd8289f9948/emails/?format=api"
    },
    "sender_name": "Erich Eichmann",
    "subject": "[amsat-bb] Re: SatPC32 not switching modes on 910H",
    "date": "2009-11-07T17:05:01Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KLTRMIITL6PB2P7F3DXBPNRSLQTILXJ6/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi Jeff;\nthe REV/NOR parameter in Doppler.SQF does not switch the radio's tracking \nmode (Revers/Normal),\nbut the tracking direction of SatPC32. The setting is important only  is \nwith SSB sats. If you tune the VFO knob, for example,  10 KHz up the program \nwill tune the TX frequency also 10 KHz up if the parameter is NOR and 10 KHz \ndown, if the parameter is REV. With FM sats the setting is meaningless \nbecause these sats work on fix channels. The  frequency changes by the \nautomatic Doppler correction change always in the opposite direction, \nregardless of the setting in Doppler.SQF.\n73s, Erich, DK1TB\n\n----- Original Message ----- \nFrom: \"K7WIN - Jeff\" <[email protected]>\nTo: \"'AMSAT-BB'\" <[email protected]>\nSent: Saturday, November 07, 2009 4:31 PM\nSubject: [amsat-bb] SatPC32 not switching modes on 910H\n\n\n> SatPC32 is not automatically switching from NOR to REV when required. I \n> have\n> verified that the Doppler.sqf file is configured correctly. I have to\n> manually switch the satellite mode.\n>\n> I am using the ICOM CT-17 interface.\n>\n> Thanks,\n> Jeff - K7WIN\n>\n> -----Original Message-----\n> From: [email protected] [mailto:[email protected]] On\n> Behalf Of OZ1MY\n> Sent: Saturday, November 07, 2009 1:37 AM\n> To: [email protected]; AMSAT-BB\n> Subject: [amsat-bb] SO-67 over Europe thanks for test\n>\n> Hi all,\n> SO-67 worked great over Europe this morning.\n> The downlink signal is the largest I have seen for years :-)\n>\n> I used FMN with mike gain turned down. That is far the best way\n> to work the uplink.\n> Some stations with a too wide deviation even made the downlink\n> change amplitude - or cut it off. I used normal FM on the receive\n> side.\n>\n> Worked G3VZV and IZ1ERR. Lots of other stations on.\n>\n> Thanks for a new satellite for us to use.\n> 73 OZ1MY\n> Ib\n>\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>\n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> \n\n\n",
    "attachments": []
}