Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/UX2OYLYLWWAMY46HLQC5P7CSFPRWACXV/?format=api
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/UX2OYLYLWWAMY46HLQC5P7CSFPRWACXV/?format=api", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api", "message_id": "093020060458.18744.451DF98A0008932C0000493822007348300B9D04C999@comcast.net", "message_id_hash": "UX2OYLYLWWAMY46HLQC5P7CSFPRWACXV", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/UX2OYLYLWWAMY46HLQC5P7CSFPRWACXV/?format=api", "sender": { "address": "w7lrd (a) comcast.net", "mailman_id": "717aa2a241704c7497e9abd8c983f6b7", "emails": "https://mailman.amsat.org/hyperkitty/api/sender/717aa2a241704c7497e9abd8c983f6b7/emails/?format=api" }, "sender_name": "[email protected]", "subject": "[amsat-bb] L/S antenna redseign", "date": "2006-09-30T04:58:50Z", "parent": null, "children": [ "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/7OE3LKCNMDHLXCU45B63RA3WZM3VFIXY/?format=api" ], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "Hello\nBob is planning a new L/S redesign. Before I pick up my hack saw I would like some opinions/advice etc. The dish-a 54X48 inch prime star. The feed -a short helix for L & S side by side in line with the fan pattern. I beleieve W0LMD tried co-wound helixes with mixed results. On the same boom is a 2M & 70cm yagi. With all this antenna and counter weight is it too much for my G5400 elevation rotor? Plan \"B\"- use a actuator similar as described in http://www.qsl.net/sv1bsx/actuator/actuator.html . I have some actuators and a lot of hacksaws and I'm not afraid to use them. With only 10watts and some hardline I feel this dish might be necessary for a HEO on L band, and I might as well use it on S. I also have a 12foot TVRO but that's another story (project) for another day. As always your opinions/advice even ridicule is appreciated.\n73 Bob W7LRD\nSeattle\n", "attachments": [] }