Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VFCFM5LJHVDNOLBCE2F7AJNWOCIYQYSJ/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "90E4F202FA6C49B49F51A09A936389B5@HPm9080n",
    "message_id_hash": "VFCFM5LJHVDNOLBCE2F7AJNWOCIYQYSJ",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/VFCFM5LJHVDNOLBCE2F7AJNWOCIYQYSJ/?format=api",
    "sender": {
        "address": "w5rkn (a) amsat.org",
        "mailman_id": "ff01b14b84774866a41c46bed944537d",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/ff01b14b84774866a41c46bed944537d/emails/?format=api"
    },
    "sender_name": "Ronald G. Parsons",
    "subject": "[amsat-bb]  ARISS downlink frequencies",
    "date": "2008-12-07T19:59:40Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/QNEOG3VYS2MJ72D3ST5JGJ67PEKABFFU/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "ARISS currently has four modes, Packet Radio (1200 and 9600), Voice, Cross-band repeater, and SSTV. All modes use 145.800 MHz as the downlink frequency except Packet which uses 145.825. \n\nThese last and next few weeks have (and will be) very exciting as all these modes are being used. I currently keep several programs running just in case a mode change occurs. I am using Ham Radio Deluxe for SSTV, AGWTracker for Packet, and SatPC32 and SatPC32ISS for frequency control for all modes with my Icom IC-910H.\n\nWhy couldn't Packet operate on 145.800 simplex instead of 145.825? Then one could just listen to 145.800 and tell which mode is being used. Currently I must switch between 800 and 825 if no mode is apparent.\n\nRon W5RKN\n",
    "attachments": []
}