Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VJ3OBIT2GQL6UCPW7NFJ3FPWDOHPQT6P/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "VJ3OBIT2GQL6UCPW7NFJ3FPWDOHPQT6P",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/BOUFLWALZNQQYVN2HZEOVWZL7662OCUN/?format=api",
    "sender": {
        "address": "dquagliana (a) aol.com",
        "mailman_id": "75c9beaffd1d4a0cb28236652097bbb0",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/75c9beaffd1d4a0cb28236652097bbb0/emails/?format=api"
    },
    "sender_name": "Douglas Quagliana",
    "subject": "[amsat-bb] Re: ARISSAT-1 TLM Problem",
    "date": "2011-09-01T00:12:52Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PQX5VMJO6BZVH2MWJSSFY6VZP7UDYXPD/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "All,\n   ARISSatTLM only uses the 48 kHz sampling rate on soundcards, so \nthat's the only rate your card needs to be able to run at for ARISSatTLM.\nDouglas KA2UPW/5\n\n\nJames McBride wrote:\n> Randy,\n> Make sure you have any audio or DSP filters switched off, IF shift to \n> centre etc. I found the 'tone' control on the FT736 affects the decode \n> (eventually, by accident).. Also I found that I had a dirty contact on \n> the soundcard input to my PC's motherboard! After I fixed some of \n> these things, the decode was okay, mind you I suspect shielded cable \n> would also be better - I'm using twin speaker lead.. :(  . Put the CW \n> at the marker (as close as possible and adjust for doppler) in USB \n> mode and you should get some good frames eventually. I've found \n> usually the high elevation passes are reliable, the low ones at 3-5 \n> degrees just don't give me enough of a chance to get telemetry sometimes.\n>\n> The soundcard is usually part of the issue also. My old P-4 shuttle \n> mainboard AC97 codec style soundcard I think only samples at 48KHz or \n> something and uses software drivers to pretend the sampling is at \n> other rates - a proper PCI soundblaster style card or high quality SDR \n> style soundcard would probably work better. At some stage I might try \n> a better PC but for now it works some of the time straight from the \n> headphone socket to line-in on the soundcard.\n>\n> 73\n> James VK6FJA\n>\n\n",
    "attachments": []
}