Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/VOTUDOQLTA7AAEQB6VZTWX5EGMYALMZX/?format=api
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VOTUDOQLTA7AAEQB6VZTWX5EGMYALMZX/?format=api", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api", "message_id": "CABsMmtQSpk2xFiz-pxCDFi5_SzupsS2tTuBR+EftsDUsS1B3jw@mail.gmail.com", "message_id_hash": "VOTUDOQLTA7AAEQB6VZTWX5EGMYALMZX", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/VCYQRILKWRZMVIRPF33J4OVAX5VSCJJS/?format=api", "sender": { "address": "johnnykludt (a) gmail.com", "mailman_id": "1052971820fa4c30a2a6e76a33ee243f", "emails": "https://mailman.amsat.org/hyperkitty/api/sender/1052971820fa4c30a2a6e76a33ee243f/emails/?format=api" }, "sender_name": "John Kludt", "subject": "Re: [amsat-bb] SatPC32 - Change xmit freq while transmitting?", "date": "2019-09-03T15:51:01Z", "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/73IFMETR3EYH3RVQHU7ANZLMEYPPUEZP/?format=api", "children": [ "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/DQODLCTFN7FQHQAYBJKIGWW6NIQUJWUM/?format=api" ], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "Kenneth,\n\nThe issue lies not with SATpc32 but with the radio. I use an ICOM-910H and\nI have a friend that runs an IC-7100. and has Satellite VUCC, The answer\nis Icoms do allow for frequency change when transmitting. On SSB I have\nthe step size set very low, 20 Hz, and everything works fine.\n\nJohn\n\n\n\nOn Tue, Sep 3, 2019 at 10:53 AM Kenneth P Alexander via AMSAT-BB <\[email protected]> wrote:\n\n> Hi mark,\n>\n> I didn't specifically exclude them, but I didn't include them list in my\n> e-mail. The Yaesu and Icom rigs I listed are similar and not satellite\n> rigs.\n>\n> I have SatPC already, but I can't test it on a 7100. I'm retired and live\n> in Thailand. I can't get a license here because the authorities here only\n> give out licenses to foreigners from a small handful of countries that have\n> reciprocal licensing agreements with Thailand, and Canada doesn't. Thus, I\n> can't legally import or own a transceiver. Plus, the 7100 has the 70cm\n> band, which isn't a legal ham band here, so I couldn't import one even if I\n> had a Thai license. Thai sat ops are limited to SO-50, FO-29 and\n> FO-99...and, well FO-29 is out of service.\n>\n> I want to set up a satellite station at a ham friend's place back in\n> Toronto that I can operate remotely from here. I don't have the\n> opportunity to experiment to see if it's possible or not to control a\n> 7100. I need to know before I buy one. I also can't afford to buy one\n> only to find out it won't work. I'm going home for a week in November and\n> have about one or two days to set the station up and get it working, so I\n> have to know that it will work. I'd like to get a 9700 but that's way out\n> of my reach...over twice the price of a 7100. I'll use an Airspy SDR as a\n> receiver.\n>\n> If the docs that came with SatPC32 were just a little bit more explicit\n> then I'd have my answer and could proceed. The 7100 is on sale at the\n> local (Toronto) ham shop for a good price until the end of this month.\n>\n> Ken Alexander\n> So Phisai, Thailand\n> Blog: bueng-ken.com\n>\n>\n> On Tue, Sep 3, 2019 at 2:26 PM Mark L. Hammond <[email protected]>\n> wrote:\n>\n> > Yes, I did read your email. You didn't specifically exclude the\n> satellite\n> > radios now, did you ; ) I was just adding some facts of which I am\n> aware.\n> >\n> > Do you have an IC-7100? If so, why don't you download SatPC32 and use in\n> > trial mode to find out for yourself. and then let us know? :)\n> >\n> > Mark N8MH\n> >\n> >\n> > On Tue, Sep 3, 2019 at 10:13 AM Kenneth P Alexander <[email protected]>\n> > wrote:\n> >\n> >> Ah. You didn't read my e-mail. I left those models off my list because\n> >> I'm interested in the IC-7100.\n> >>\n> >> Thanks anyway.\n> >>\n> >> Ken Alexander\n> >> So Phisai, Thailand\n> >> Blog: bueng-ken.com\n> >>\n> >>\n> >> On Tue, Sep 3, 2019 at 2:08 PM Mark L. Hammond <[email protected]>\n> >> wrote:\n> >>\n> >>> Yes for 910, 9100, and 9700!\n> >>>\n> >>> Mark N8MH\n> >>>\n> >>> On Tue, Sep 3, 2019 at 10:03 AM Kenneth P Alexander via AMSAT-BB <\n> >>> [email protected]> wrote:\n> >>>\n> >>>> Can SatPC32 (or any other software for that matter) change the\n> transmit\n> >>>> frequency on an Icom transceiver while it is transmitting? Yaesu\n> >>>> doesn't\n> >>>> permit this. I'm particularly interested in the Icom IC-7100.\n> >>>>\n> >>>> Anybody know? Reading through the SatPC32 docs I see that there is a\n> >>>> sentence about Yaesu rigs (FT-817, 818, 857, 991 etc) saying it can't\n> be\n> >>>> done), but no similar statement about Icoms (706, 7000, 7100 etc.)\n> >>>>\n> >>>> Thanks and 73,\n> >>>>\n> >>>> Ken Alexander\n> >>>> So Phisai, Thailand\n> >>>> Blog: bueng-ken.com\n> >>>> _______________________________________________\n> >>>> Sent via [email protected]. AMSAT-NA makes this open forum available\n> >>>> to all interested persons worldwide without requiring membership.\n> >>>> Opinions expressed\n> >>>> are solely those of the author, and do not reflect the official views\n> >>>> of AMSAT-NA.\n> >>>> Not an AMSAT-NA member? Join now to support the amateur satellite\n> >>>> program!\n> >>>> Subscription settings:\n> https://www.amsat.org/mailman/listinfo/amsat-bb\n> >>>>\n> >>>\n> >>>\n> >>> --\n> >>> Mark L. Hammond [N8MH]\n> >>>\n> >>\n> >\n> > --\n> > Mark L. Hammond [N8MH]\n> >\n> _______________________________________________\n> Sent via [email protected]. AMSAT-NA makes this open forum available\n> to all interested persons worldwide without requiring membership. Opinions\n> expressed\n> are solely those of the author, and do not reflect the official views of\n> AMSAT-NA.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb\n>\n", "attachments": [] }