Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VQ6Y64MAJC63YDCQFEUXMAEIKUWPQJ2Z/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CAJCSnOb2cZFvKYFgYBEZ7TEnWxutedhmoF7EQ6Po-GppPC-8gw@mail.gmail.com",
    "message_id_hash": "VQ6Y64MAJC63YDCQFEUXMAEIKUWPQJ2Z",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ARU53PST7TJUBCIWRUBBCMQNC42VEJIZ/?format=api",
    "sender": {
        "address": "scott23192 (a) gmail.com",
        "mailman_id": "120e10e05ba14969a11da0a96d21e355",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/120e10e05ba14969a11da0a96d21e355/emails/?format=api"
    },
    "sender_name": "Scott",
    "subject": "Re: [amsat-bb] Corrected Husky-1 Telem Frequency",
    "date": "2020-02-05T05:52:39Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ARU53PST7TJUBCIWRUBBCMQNC42VEJIZ/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi Mike!\n\nThe downlink is 435.800.\n\nThe photo at the following URL shows late in a pass when the\ndoppler-corrected downlink freq at my location had traveled to around\n435.790.\n\nhttps://twitter.com/scott23192/status/1223435881467596802/photo/1\n\nBut with USB, it gets tricky... using an SDR, you visually adjust the\nsignal's position to keep the audio output centered on 1500 Hz (the middle\nof the 3KHz audio bandwidth).\n\nAccomplishing the same thing with a regular radio seems like it would be\nvery difficult without any visual feedback to make fine adjustments.\n\n-Scott,  K4KDR\n\n======================\n\nOn Wed, Feb 5, 2020 at 12:18 AM Mike Lucas via AMSAT-BB <[email protected]>\nwrote:\n\n> Would someone please repost the corrected downlink Telem frequency to use\n> for Doppler control.\n>\n> Thanks!\n>\n> Mike N7ASZ\n>\n",
    "attachments": []
}