Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/XMCLRCTELYV7HYVLUGJPWSIN3UG2KOL5/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "44B9ECB2B194404380DB69127A862D03@Athlon",
    "message_id_hash": "XMCLRCTELYV7HYVLUGJPWSIN3UG2KOL5",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/O6XMOX4DGTT5T2S36PCTFY7OITUHSTWB/",
    "sender": {
        "address": "ve4yz (a) mts.net",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Alan VE4YZ",
    "subject": "[amsat-bb] Re: SatPC32, Yaesu FT-736, and KCT",
    "date": "2009-10-27T03:07:44Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/KZKVN7CQV4IUOKI2X6GPBB76NSJKBU4W/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Error.. FT-736r CAT DIN has 4 connections not the 2 noted below.  GND,\nSignal In, 13V , Signal Out  See schematic and \n\nhttp://www.mindspring.com/~n2wwd/html/body_doppler_compensation.html\n\n\n> -----Original Message-----\n> From: [email protected] \n> [mailto:[email protected]] On Behalf Of Alan VE4YZ\n> Sent: October 26, 2009 9:56 PM\n> To: 'Jim Bennett'\n> Cc: 'Amsat-BB'\n> Subject: [amsat-bb] Re: SatPC32, Yaesu FT-736, and KCT\n> \n> Hi Jim,  SATPC32 will run the FT736r directly using a serial \n> port or a USB/Serial adapter to the 6 pin DIN CAT port on the \n> radio.  However, the cable must include a TTL/Serial \n> converter.  Page 13 of my FT736r manual using GND, S.IN only  \n> If you are already running directly from PC to Radio with the \n> proper cable you need to confirm the baud rate on SATPC32 is \n> 4800 as that is the only rate the 736r understands.\n> \n> When I used to run WISP for GO-32, it did NOT run the radio \n> or rotators.  It just ran the TNC.  SatPC32 did the radio and \n> rotator controller.\n> \n> I made a TTL/Serial adapter and mounted it inside the DB9 \n> connector. See\n> here:\n> \n> http://picasaweb.google.com/ve4yz.alan/RS232TTL#\n> \n> \n> Hope this helps\n> \n> 73, Alan VE4YZ\n> EN19kv\n> AMSAT LM 2352\n> http://www.wincube.ca\n> \n> \n>  \n> \n> > -----Original Message-----\n> > From: [email protected] \n> > [mailto:[email protected]] On Behalf Of Jim Bennett\n> > Sent: October 26, 2009 9:09 PM\n> > To: [email protected]\n> > Subject: [amsat-bb] SatPC32, Yaesu FT-736, and KCT\n> > \n> > Has anyone got this configuration working?  My current setup is:\n> > \n> >  \n> > \n> > Yaesu FT-736, WISP, Kansas City Tracker/Tuner with Yaesu 5400 \n> > rotor control box.\n> > \n> >  \n> > \n> > I have try to use Satpc32 with the KCT and it will interface \n> > with the rotor control, but will not tune the radio.  \n> > \n> >  \n> > \n> > Do I need a separate cable for the data link?  Or will \n> > Satpc32 interface with KTC and tune thru the KTC board?\n> > \n> >  \n> > \n> > Thanks for any info.\n> > \n> >  \n> > \n> > Jim\n> > \n> > KE4KOL\n> > \n> >  \n> > \n> > _______________________________________________\n> > Sent via [email protected]. Opinions expressed are those of \n> > the author.\n> > Not an AMSAT-NA member? Join now to support the amateur \n> > satellite program!\n> > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> > \n> \n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of \n> the author.\n> Not an AMSAT-NA member? Join now to support the amateur \n> satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n> \n\n",
    "attachments": []
}