Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Y5HALMRMVT535YK6LQKDPZW7UVWOEYR3/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "Y5HALMRMVT535YK6LQKDPZW7UVWOEYR3",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/Y5HALMRMVT535YK6LQKDPZW7UVWOEYR3/",
    "sender": {
        "address": "4z1ws.sam (a) gmail.com",
        "mailman_id": "5448704e2ad04c8e959042721798da83",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/5448704e2ad04c8e959042721798da83/emails/"
    },
    "sender_name": "Shamai \"SAM\" Opfer",
    "subject": "[amsat-bb]  Questions regarding WISP and operating satellite BBS",
    "date": "2009-10-03T22:17:20Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi all\n\nI am trying to download telemetry from GO-32 in KISS mode, and later on,\nI would also like to operate the AO51 BBS.\n\nI tried two ways.  In both there is something missing...  I hope someone\nwill be able to give me some advise...:\n\nWay #1. With SatPC32.\nSatPC32 provides good tracking capabilities.  I get automatic receiving\nfrequency control via CAT, including Doppler compensation, and I get\nautomatic antenas control via the LVBTracker.  However, I am missing a\nsoftware to capture the KISS information in a file, and will also need to\nwork with the PACSAT protocol for the BBS.\n\nWay #2. With WISP.\nI succeeded to get the antennas rotor control working by WISP, but so far I\ncould not learn how to control the transceiver frequencies, and also\nto automaitcally switch from receive to transmit for sending packets and\nrequests to the satellite.\n\nI have an ICOM IC910H and a Kantronic 9612Plus TNC.\n\n My PC is a laptop with only USB ports..., no RS232.  I am using USB to\nRS232 converters, but I don't think i can access hardware pins of the DB25\nafter the converters, for the T/R control.\n\nThanks & 73,\n\nShamai\n4Z1WS\n",
    "attachments": []
}