Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Z64ZADKO3D56K6M3PSAH5LS6Z4VCNHOF/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "Z64ZADKO3D56K6M3PSAH5LS6Z4VCNHOF",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/I2N22KB3EJJT4GOIIYPMNQQCRH3DFUPQ/",
    "sender": {
        "address": "w4upd (a) bristor-assoc.com",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "w4upd",
    "subject": "[amsat-bb] Re: FT-847 Serial Port Communications",
    "date": "2008-02-10T22:18:41Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/I2N22KB3EJJT4GOIIYPMNQQCRH3DFUPQ/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I'm not sure it/they are the same, but I had a similar problem with my \nFT-857 and found that the voltage that is suppose to be on the data line \nconnector was missing. If you are using a Yaesu data cable, they usually \nderive their power from the mini-din connector on the back. In my case, \na 3 amp surface mounted pico fuse opened up inside the radio. This can \nhappen if you plug/unplug the data cable with the unit hooked up to \npower and especially if it is on.\n\nAgain, don't know if this is the case, but it could be a similar \nproblem. Check for voltage on the data connector if it is suppose to \nhave any.\n\nRegards,\n\nReid, W4UPD\n\n\n\nGary Schuchardt wrote:\n>  \n>\n> I have a problem involving the 9 pin serial port on the back of my FT-847\n> Yaesu transceiver.  When I try to use a null modem cable between the rig and\n> my PC on either COM 1 or 2, the rig will not respond to compatible rig\n> controller (CAT) nor a memory management program.  The COM ports have been\n> tested as well as the use of two different PCs.  Neither null modem cable\n> works. I have tried to use the Menu feature on the FT-847 to match baud rate\n> between radio and PC COM port.  Has anyone had a problem like this with the\n> Yaesu FT-847?  I would appreciate knowing.\n>\n> Thank you.\n>\n> Gary N0EZH  \n> _______________________________________________\n> Sent via [email protected]. Opinions expressed are those of the author.\n> Not an AMSAT-NA member? Join now to support the amateur satellite program!\n> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb\n>\n>\n>   \n\n",
    "attachments": []
}