Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/ZFE5FXMATZO43FEQ6ZDTZTQA4REWC7KM/
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZFE5FXMATZO43FEQ6ZDTZTQA4REWC7KM/", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/", "message_id": "[email protected]", "message_id_hash": "ZFE5FXMATZO43FEQ6ZDTZTQA4REWC7KM", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ZFE5FXMATZO43FEQ6ZDTZTQA4REWC7KM/", "sender": { "address": "jonny290 (a) gmail.com", "mailman_id": "bed0432ae6e64c0493fa6343553c3746", "emails": "https://mailman.amsat.org/hyperkitty/api/sender/bed0432ae6e64c0493fa6343553c3746/emails/" }, "sender_name": "Jonny 290", "subject": "[amsat-bb] Icom CI-V question - 271/471 with Piexx board", "date": "2007-03-13T11:18:38Z", "parent": null, "children": [ "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/QVO3NP2IEOD3FDTBLYLSSRBRF7IFP222/" ], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "I'm looking at buying a pair of Piexx computer interface boards to put in\nIcom 271 and 471 radios.\n\nI'm going to want to control these radios with the WiSP DDE client(I think,\nsuggest another if there's a better one). It does not have an \"Icom 751\"\noption on the radio dropdown box, which is normally what one would use with\nthis board. However, it does have a field to manually input the address.\nHere's my question.\n\nCan I select \"Icom 275\" or any other similar type of radio in the WiSP DDE\nbox and then set the address manually, to my radios' addresses? From what I\nunderstand, the only radio-specific information in a CI-V command is the\naddress value, and since I'll be sending legal frequencies to these radios,\nI'm thinking this will work...but want to make sure before I spend $300 on\ninterfaces. The PIexx interfaces appear to be standard CI-V interface\ndevices, usually set up to be addressed at $20 for 271's and $22 for 471's.\n\n\n73,\nMatt\n", "attachments": [] }