Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZHG5PT6K4AS5I5RA37ROS2LCEO725TOV/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "B946EA326676459EB9B62011F55E997D@parents",
    "message_id_hash": "ZHG5PT6K4AS5I5RA37ROS2LCEO725TOV",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/XVQPD6W7BSSGALJM7YRNQPCXGPI7LB4X/?format=api",
    "sender": {
        "address": "ka3hsw (a) att.net",
        "mailman_id": "afface7d7e8049fda539552165bdde78",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/afface7d7e8049fda539552165bdde78/emails/?format=api"
    },
    "sender_name": "George Henry",
    "subject": "[amsat-bb] Re: Icom AG-35 Preamp Question",
    "date": "2012-08-12T01:35:00Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/XVQPD6W7BSSGALJM7YRNQPCXGPI7LB4X/?format=api",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "First, make sure that nothing else that might block DC is in line between \nthe power inserter and the preamp.  Then, have someone go up the ladder and \nlisten as you turn the power feed on and off.  They should hear a distinct \nclick as the relays in the preamp engage.  Tune to a distant repeater, and \nyou should see at least a 2 - 3 S-unit increase when the preamp is on.\n\nHow much current is the KP2 capable of supplying?  If it can't pull in those \nrelays, the preamp will remain in bypass mode.\n\n\nGeorge, KA3HSW\n\n\n\n----- Original Message ----- \nFrom: \"Lawn, Richard\" <[email protected]>\nTo: <[email protected]>\nSent: Saturday, August 11, 2012 5:29 PM\nSubject: [amsat-bb] Icom AG-35 Preamp Question\n\n\n>I bought an Icom AG-35 preamp about a year ago. The fellow ham advertised \n>it\n> as virtually brand new and it was/is. I planned to use it this summer with \n> a\n> TS-2000 which doesn't supply 12v voltage to the coax to power a preamp as\n> other xcvrs do. I used a Mirage KP2 unit to inject power to the coax to\n> drive mast mounted the preamp. When I turn the power on there seems to be\n> little or no noticeable difference in background noise and worse than that \n> I\n> cannot here any signals on FO-29 downlink, and I know the bird has been\n> active. Any suggestions? Is the preamp fried? I can't even get the weather\n> proof case off to trouble shoot, not that I'd know what to look for. Any\n> suggestions on repair?\n>\n> TNX\n> 73\n> Rick\n> W2JAZ\n\n",
    "attachments": []
}