Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZMI2NAI3PBA6UOBELNQ7NWTUQPX7SIUH/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "ZMI2NAI3PBA6UOBELNQ7NWTUQPX7SIUH",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ZMI2NAI3PBA6UOBELNQ7NWTUQPX7SIUH/",
    "sender": {
        "address": "hamoen (a) iae.nl",
        "mailman_id": null,
        "emails": null
    },
    "sender_name": "Henk, PA3GUO",
    "subject": "[amsat-bb] Re: GO-32 APRS over Europe",
    "date": "2007-09-17T19:47:06Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi Chris (and others),\n\nFew things to take into account:\n- D7/D700/TS2000 built in TNC is not full duplex\n- When you use the TNC, you can't also compensate for doppler.\n\nSo I could park my TS2000 on the center freq., but that would\nonly work for a small period of time of the pass. Best would\nbe to have a few stations eg +5 kHz and others -5 kHz, until\nwe have enough IGates, and we all park on the center frequency.\n\nI will try during the next passes:\n- my antennas will follow GO-32\n- my TS200 will monitor 435.230 MHz\n- Using Alogger, APRS may show up on findu, but no guarantee.\n  (I can post the log files though)\n\nGive it a go, I may see your packet !\n\nps: there are Gxxxx stations that have their station cfg'ed\nfor GO-32 already, if they read this they may be able to join !\n\nHenk, PA3GUO\n\n>I will perhaps contact Henk PA3GUO to see if we can give it a go here in\n>Europe, although mine will have to be via HT in the garden with a Dual band\n>beam..\n>\n>What do you say Henk to having a go perhaps over the weekend?\n>\n>Let me know,\n>\n>Thanks,\n>\n>Chris - M0DQO-13 - GO-32 APRS :)\n\n\n\n",
    "attachments": []
}