Show an email

GET /hyperkitty/api/list/[email protected]/email/ZW6KOM3ZUPUB3T2XXFVFB5JXCLF5B7VW/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZW6KOM3ZUPUB3T2XXFVFB5JXCLF5B7VW/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "ZW6KOM3ZUPUB3T2XXFVFB5JXCLF5B7VW",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ZW6KOM3ZUPUB3T2XXFVFB5JXCLF5B7VW/?format=api",
    "sender": {
        "address": "co7wt (a) frcuba.co.cu",
        "mailman_id": "e0c3935155ca4fb78cafec35cf64d7f2",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/e0c3935155ca4fb78cafec35cf64d7f2/emails/?format=api"
    },
    "sender_name": "Pavel Milanes Costa",
    "subject": "[amsat-bb] ISS APRS in low power?",
    "date": "2014-12-13T20:18:01Z",
    "parent": null,
    "children": [
        "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/VXAFMJALTQOWC4C6CJ23HMPEPZHZ2XBB/?format=api"
    ],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Hi to all...\n\n From a few days now (3 actually) I have been monitoring the ISS APRS \ndigipiter, and seems to me that the power has been turned down or \nequipment changed...\n\nToday I conducted a (long delayed) maintenance to my 3 antennas on the \nback yard, two J-poles and the HF doublet...\n\nI was worried about the performance of my antennas, nope... SWR is 1.2 \nand lower on the two J-poles... and I can reach the usual local and \nquasi-dx repiters in my area... (hombrew copper pipe J-Poles and AH \nLDF-4 on both...)\n\nSo, I'm right? ISS APRS equipment has reduced power?\n\nI remember working ISS APRS with this setup and signals was very strong, \nnow I have to open the squelch to hear something...\n\n73 from CO7WT.\n\n\n",
    "attachments": []
}