Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/ZZFDC3ATVARVJM52UOWYNIVGI3U4LUX7/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "ZZFDC3ATVARVJM52UOWYNIVGI3U4LUX7",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/ZZFDC3ATVARVJM52UOWYNIVGI3U4LUX7/",
    "sender": {
        "address": "wills (a) pcward.net",
        "mailman_id": "f28814e2f4b54615bac9a5bfc36cd960",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/f28814e2f4b54615bac9a5bfc36cd960/emails/"
    },
    "sender_name": "Wills",
    "subject": "[amsat-bb] Receiving Telemetry from AO-73 with IC-9100",
    "date": "2016-09-11T11:22:42Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I am finding it very difficult to successfully receive/decode telemetry from AO-73 and Ukube-1 using an IC-9100 and SatPC32 as compared to receiving same when using an IC-821H.\nAre there any hidden/secret settings on the IC-9100 which have to be set to allow successful reception/decode of the telemetry. Should one be trying to receive with the IC-9100 in the Digital mode?\nIs there a command which one can enter in the Doppler.sqf file in SatPC32 (like DFM which puts the IC-9100 into Digital FM mode) to put the IC-9100 into the Digital mode for USB reception?\nI did try DUSB entered into the Dopple.SQF file of SatPC32, but this did not work.\nI have tried several different settings in the menu section of the transceiver, all to no avail.\nUsing the IC-821H I can receive/decode the telemetry from about 5 degrees elevation (going up) to 3 degrees (going down), but with the IC-9100 I do not start to receive/decode until the satellite is about 25 - 30 degrees elevation (up) and then lose it when the satellite is about 20 degrees elevation (down). Using the same antenna system on both so the antennas can not be having a large effect on the IC-9100. Plus decoding is constantly stopping during the pass, thus missing a large amount of data unlike the IC-821H which hardly ever stops decode during a pass.\nAppreciate any suggestion one may be able to provide.\n\nWal VK4CBW",
    "attachments": []
}