Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/IZEC6FA47L4XFE4LI7SOZJAMYTADSIPN/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CACZz0S3jNyjXwCPqsQ_JpQ+_Na4CkQ+UTa5GX6Xwt5wA5utJQQ@mail.gmail.com",
    "message_id_hash": "IZEC6FA47L4XFE4LI7SOZJAMYTADSIPN",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/IZEC6FA47L4XFE4LI7SOZJAMYTADSIPN/?format=api",
    "sender": {
        "address": "ks1g04 (a) gmail.com",
        "mailman_id": "30590cddbe684a52a5c3c945059cdd06",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/30590cddbe684a52a5c3c945059cdd06/emails/?format=api"
    },
    "sender_name": "Stephan Greene",
    "subject": "[amsat-dc] Need SatPC32 troubleshooting help",
    "date": "2012-06-05T02:30:20Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Getting back onto the satellites in prep for Field Day (and I've had\nmy 1st QSOs on AO-7, SO-50, and this evening, VO-52 - yay!).  Running\ninto weirdness now with SatPC32 controlling the transmit frequency on\nmy Icom 821. This is one of those, \"well' I think it WAS working\ncorrectly\" situations (and no I don't know what I did, if anything, to\nbugger it up). Or it may have always been there and I didn't notice it\nuntil I started trying more passes and closer to max elevation/max\nrate of doppler shift.\n\nWhile transmitting, when the program sends the radio a frequency\ncorrection (due to any combination of doppler and uplink tuning via\nthe screen controls), the transmit frequency shifts 5 MHz down on 70cm\n(at least on AO-7, down from 435.x to 430.x) and up 1MHz (145.x to\n146.x) when the uplink is on 2M.  Goes back to normal after I stop\ntransmitting and wait for the next correction, or toggle CAT control\noff and back on.  So far, I've seen this on at least AO-7 and VO-52,\nand confirmed it on the FO-29 settings.  Frustrating - I now have to\nswitch off the radio control and find my d/l the old fashioned-way.\nRadio is otherwise responding to CAT commands normally.   The RX\nfrequency is unchanged throughout.  Radio is configured in satellite-R\nmode, main band as d/l and sub-band as u/l.\n\nI've tried different settings of baud rate and CAT command delay\nwithout effect.  I also tried a 100% uninstalling and reinstalling\nSatPC32 (pretty sure everything cleared because I had to reconfig the\nprogram from scratch) without stopping this behavior.  Version is\nlatest (SatPC32 12.8b), registered (AMSAT-NA of course), running on\nWindows7 64 (run it as administrator from my user account).  CAT\ncontrol of the radio is otherwise fine, addresses for main & sub bands\nappear correct, CAT baud rate is 19k2, and CAT delay is 70, \"use\nsattelite mode\" box is checked.  Slower baud rates and longer delays\ndid not clear the problem.  RF feedback into the control cable (USB\nwith built in serial converter) is plausible (I get some pickup on the\nPC speakers on 2M, full power), not sure I have a good way to test for\nthat.\n\nAssuming I don't find and fix the problem 5 seconds after I hit\n\"send\", any suggestions to fix?  The problem is very repeatable and\nvery frustrating.\n\nThanks & 73\nSteve KS1G\n\n-- \n-----------------------------------------------------------------------------------------------------------------\nSteve Greene  [email protected]  <kay ess one gee zero four>@gmail.com\n-----------------------------------------------------------------------------------------------------------------\n\n",
    "attachments": []
}