GET

Email Detail

Show an email

GET /hyperkitty/api/list/[email protected]/email/EV7G7WFXWLNXRHVLPSECRIMUHQN3IDWX/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/EV7G7WFXWLNXRHVLPSECRIMUHQN3IDWX/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "CADDbS5BRkjKP8Yq8OUTfV+CFR_X1LYZjWOMRUH3XCXzBDK=ybQ@mail.gmail.com",
    "message_id_hash": "EV7G7WFXWLNXRHVLPSECRIMUHQN3IDWX",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/EV7G7WFXWLNXRHVLPSECRIMUHQN3IDWX/?format=api",
    "sender": {
        "address": "k0jm.mark (a) gmail.com",
        "mailman_id": "4fa2bb5eca934ca4b14c4ede20ff0c9a",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4fa2bb5eca934ca4b14c4ede20ff0c9a/emails/?format=api"
    },
    "sender_name": "Mark Johns, K0JM",
    "subject": "[ANS] ANS-324 AMSAT News Service Weekly Bulletins for Nov. 20",
    "date": "2022-11-20T00:00:00Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "AMSAT NEWS SERVICE\nANS-324\n\nThe AMSAT News Service bulletins are a free, weekly news and information\nservice of AMSAT, The Radio Amateur Satellite Corporation. ANS publishes\nnews related to Amateur Radio in Space including reports on the activities\nof a worldwide group of Amateur Radio operators who share an active\ninterest in designing, building, launching and communicating through analog\nand digital Amateur Radio satellites.\n\nThe news feed on http://www.amsat.org publishes news of Amateur Radio in\nSpace as soon as our volunteers can post it.\n\nPlease send any amateur satellite news or reports to: ans-editor [at]\namsat.org\n\nYou can sign up for free e-mail delivery of the AMSAT News Service\nBulletins via the ANS List; to join this list see:\nhttps://mailman.amsat.org/postorius/lists/ans.amsat.org/\n\nIn this edition:\n\n* OMOTENASHI is Struggling to Carry Amateur Radio to the Moon\n* Amateur Radio Operators and More Will Track NASA's Artemis 1\n* New Groundstation Software Available for GreenCube\n* Release Date of CAS-10/XW-4\n* U.S. High School CubeSat to be APRS Relay\n* CAPSTONE Arrives to Orbit at the Moon\n* Changes to AMSAT-NA TLE Distribution\n* ARISS News\n* Upcoming Satellite Operations\n* Hamfests, Conventions, Maker Faires, and Other Events\n* Satellite Shorts From All Over\n\n\nANS-324 AMSAT News Service Weekly Bulletins\n\nTo: All RADIO AMATEURS\nFrom: Radio Amateur Satellite Corporation\n712 H Street NE, Suite 1653\nWashington, DC 20002\n\nDATE 2022 NOV 20\n\n\nOMOTENASHI is Struggling to Carry Amateur Radio to the Moon\n\nOMOTENASHI, a project of the JAXA Ham Radio Club, was a secondary payload\naboard NASA's Artemis 1 mission, launched on November 16. It plans to land\non the surface of the moon, and to transmit a beacon in the amateur 70cm\nband.\n\nControllers have reported OMOTENASHI is tumbling, making it difficult for\nthe spacecraft to charge its batteries and communicate with the ground. Of\nthe ten cubesats flown as secondary payloads, seven are operation, two have\nnot been heard from, and OMOTENASHI is struggling. Controllers are\ncontinuing recovery attempts.\n\nOMOTENASHI is derived from Outstanding MOon exploration TEchnologies\ndemonstrated by NAno Semi-Hard Impactor. Omotenashi is also a Japanese word\nfor hospitality.\n\nJAXA Ham Radio Club planned to utilize the flight demonstration opportunity\nof the OMOTENASHI mission to conduct the following amateur radio missions:\n (i) To conduct technological research with respect to receiving ultra-weak\nUHF signal from a space probe toward the moon\n (ii) To conduct an outreach activity providing amateur radio operators all\nover the world with an opportunity to try to receive signals from moon\nregion.\n\nOMOTENASHI is a 6U-CubeSat with external dimensions of 239 x 366 x 113mm\nand an approximate mass of 14 kg.\n\nOMOTENASHI consists of three modules: orbiting module, retro motor module,\nand surface probe. During the moon transfer orbit, these modules are\nintegrated. When OMOTENASHI arrives at the moon, the surface probe will be\nseparated and conduct semi-hard landing.\n\nIf control is regained, OMOTENASHI will be actively controlled by\nultra-small attitude control system including star tracker, sun sensor,\nIMU, reaction wheel, and cold gas jet thruster. During the moon transfer\norbit, OMOTENASHI may be spin-stabilized due to the strict resources. For\nfurther details, please see:\nhttps://www.isas.jaxa.jp/home/omotenashi/JHRCweb/jhrc.html\n\nThere will be UHF CM/PSK/PM/PSK31 beacons, with 1 watt RF, on both the\norbiting module and the surface probe. CisLunar explorer, MIT KitCube and\nLunar IceCube are expected to share the same launch.\n\nOrbiting Module DOWNLINK\n\nFrequency: 437.31 MHz\nAntenna: SRR antenna\nPolarization: Linear\nModulation: beacon, PSK31 Sync Word C1 (ASCII code)\nPower: 30dBm\n\nSurface Probe DOWNLINK\n\nFrequency: 437.41 MHz\nAntenna: invert-F antennax4\nPolarization: LHCP(, RHCP)\nModulation: FM, PSK31, PCM-PSK/PM Sync Word C1 (ASCII code)\nPower: 30dBm\n\nJAXA Ham Radio Club had announced prior to launch that amateurs can\nconstantly access the newest TLE from https://bit.ly/3wyopTr  This file is\nto be overwritten when the next TLEs are calculated. However, the site\nappears to still display pre-launch keps at this time.\n\nThe JAXA Club posts updates at\nhttps://www.isas.jaxa.jp/home/omotenashi/JHRCweb/jhrc.html\n\n[ANS thanks JAXA Ham Radio Club and parabolicarc.com for the above\ninformation]\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n            The 2022 AMSAT President's Club coins have arrived!\n To commemorate the 50th anniversary of its launch on\nOctober 15, 1972, this year's coin features\nan image of AMSAT-OSCAR 6.\n Join the AMSAT President's Club today and help\nKeep Amateur Radio in Space!\n https://www.amsat.org/join-the-amsat-presidents-club/\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\nAmateur Radio Operators and More Will Track NASA's Artemis 1\n\nAmateur radio operators will join a powerful international network tracking\nNASA's Orion spacecraft.\n\nNASA officials announced that a network of 18 volunteers, organizations and\nspace agencies will assist with tracking Artemis 1, which will send an\nuncrewed Orion spacecraft to orbit around the moon after blasting off from\nEarth atop a Space Launch System (SLS) rocket. Launch occurred on Nov. 16.\n\nThe selected volunteers, including two individuals in the amateur radio\ncommunity, will \"demonstrate whether they can receive Orion's signal, and\nuse their respective ground antennas to passively track and measure changes\nin the radio waves transmitted by Orion,\" NASA officials said in a\nstatement Oct. 31.\n\nNASA collected the proposals in a Request for Information released in\nAugust. Data the participants pick up will be sent to the agency's Space\nCommunications and Navigation (SCaN) program. The goal is to improve\ntracking information for future deep-space missions, NASA officials stated.\nNASA, of course, will also gather its own tracking data on Orion.\n\nSelected volunteers from the amateur radio community include:\n    Non-profit: CAMRAS, Netherlands\n    Academic institutions: Space Systems Design Laboratory, Georgia Tech\nResearch Institute, U.S.\n    Private citizens: Scott Chapman, K4KDR (U.S.) and Scott Tilley, VE7TIL\n(Canada)\n\n[ANS thanks space.com for the above information]\n\n---------------------------------------------------------------------\n\nNew Groundstation Software Available for GreenCube\n\nAs of Nov. 18, a total of 135 stations digipeated via the Italian GreenCube\nsatellite. These stations represent 31 DXCC entities. Stations now report\nusing various combinations of software to operated through the satellite.\nOne constant is using SatPC32ISS for antenna tracking and doppler\ncorrection.\n\nThe S5Lab GreenCube team software is a bit more complicated and at the\nbeginning that was all that was available. It used three programs,\nincluding GNURadio, GreenCubeTNC and GreenCubeDigi.\n\nHowever, UZ7HO quickly created the digi app and custom soundmodem after the\nS5Lab release, most everyone has migrated to UZ7HO now. Note: UZ7HO has\nupdated the program from time to time, so download it again once in a while\nto get the updates. It is available at: https://uz7.ho.ua/greentnc.zip\n (There are both FM and SSB soundmodems included in the package, but the FM\none can ignored, as all are using USB-D for both uplink and downlink.) Note\nmatching the rig bandpass filter with the Soundmodem one (900-2100 Hz)\nhelps to have a better S/N particularly if you have local QRM.\n\nThe radio will interface with soundmodem via a soundcard or virtual audio\ncable. Soundmodem.exe is located in the \\greentnc\\usb directory, and is a\nseparate program.  This program needs to be configured to connect with your\nradio’s audio interface. The digipeater software is in the client\ndirectory, called GreenCubeDigi.exe. GreenCubeDigi automatically connects\nto soundmodem via TCP. So you should have two programs running, one the TNC\nand the other the digi “terminal.”\n\nOps may add GetKISS+ software, by  Mike Rupprecht, DK3WN, in order to\nupload received packets to SatNOGS. This isn’t necessary, but it does help\nadd coverage for telemetry. This software is a bit tricky to get working,\nbut once you have one of Mike’s programs running other programs will work\nwithout any issues. Mike’s software can be found here:\nhttps://www.satblog.info/software/\n\nDoug Papay, K8DP, recommends installing GetKISS+ v1.4.1 (he could not get\nv1.4.2 to work). It requires VB6 runtime, which should already be\ninstalled, and the ActiveX OCX controls need to be registered.  See:\nhttps://www.pe0sat.vgnet.nl/decoding/tlm-decoding-software/dk3wn/ for\ninstructions on how to do this. Make sure to run the command prompt as\nAdministrator when performing the regsrv32.exe commands.  Also, do not\ndelete or move the OCX files after registering them. (The OCX files should\nbe placed in C:\\Libraries\\OCX folder)\n\nMike also has a GreenCube Telemetry Decoder that you can download—it is a\nnice program that graphically displays the telemetry. He has also added a\ndigipeater message display and list of unique callsigns heard—a nice\nfeature.\n\nThe config.ini files will need to be updated to reflect your station\ndetails.  These files are located in the folder where you keep GetKISS+ and\nGreenCube Telemetry Decoder.\n\nGetKISS+ and GreenCube Telemetry Decoder connect via TCP to the soundmodem\nall using the same IP (localhost) and port number.\n\nSome have been confused by the lack of an ACK message after transmitting a\npacket to the satellite. It is sent only if the Tx delay is used. However,\nit is better to use Tx delay 0 for real-time QSOs to avoid unnecessary\ntransmission by the bird (saving on-board power). With Tx delay 0 you will\nreceive your own message as an acknowledgement.\n\n[ANS thanks Doup Papay, K8DP, and Jean Marc Momple, 3B8DU, for the above\ninformation]\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\n     Need new satellite antennas? Purchase Arrows, Alaskan Arrows,\n    and M2 LEO-Packs from the AMSAT Store. When you purchase through\n           AMSAT, a portion of the proceeds goes towards\n                  Keeping Amateur Radio in Space.\n           https://amsat.org/product-category/hardware/\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\nRelease Date of CAS-10/XW-4\n\nAMSAT-China, or CAMSAT, http://www.camsat.cn, has announced December 18 as\nthe release date for CAS-10/XW-4. Photos of this satellite may be seen at:\nhttps://twitter.com/bd5rv/status/1592978613204586496  and\nhttps://twitter.com/bd5rv/status/1593693879798497285\n\nAs previously reported by ANS, CAMSAT’s CAS-10/XW-4 satellite was launched\non November 12, 2022, carried on the Tianzhou 5 cargo spacecraft to the\nChinese Space Station. The satellite will be active immediately upon\ndeployment into its own 400 km orbit with an inclination of 42.9 degrees.\nCAS-10 carries a VHF uplink and UHF downlink linear transponder with a\nbandwidth of 30kHz. Downlink frequencies for VHF/UHF linear transponder\n435.180 MHz, for UHF CW telemetry beacon 435.575 MHz and for GMSK telemetry\n435.725 MHz. Also an uplink for the transponder 145.870 MHz have been\ncoordinated.\n\n[ANS thanks Michael Chen, BD5RV/4, for the above information]\n\n---------------------------------------------------------------------\n\nU.S. High School CubeSat to be APRS Relay\n\nTJREVERB, a 2U CubeSat built by Thomas Jefferson High School for Science &\nTechnology, has been frequency coordinated to operate as an APRS relay on\n145.825 MHz. It is scheduled for launch on the SpaceX Falcon 9 rocket and\nDragon spacecraft set to deliver additional science, crew supplies, and\nhardware to the International Space Station next week. The satellite will\nbe released from ISS at a later time.\n\nThe first U.S. high school to send a CubeSat to space back in 2013, Thomas\nJefferson High School for Science and Technology’s Research and Education\nVehicle for Evaluating Radio Broadcasts satellite aims to study the use of\niridium as a primary radio communication method. Additionally, the\nsatellite will demonstrate using a passive magnet onboard and the Earth’s\nmagnetic field for stabilization rather than using an attitude\ndetermination and control system for pointing accuracy and stabilization\nfor iridium. What makes this satellite even more notable is that it was a\nsystem’s engineering project. The students selected space-grade parts,\nwired the electronics for the satellite, wrote the drivers to control the\ndifferent systems, and coded the flight software.\n\n“What’s special about TJREVERB isn’t necessarily the mission, it’s what we\ndid. These kids literally built a satellite the way the industry would\nbuild a satellite; we selected parts from vendors and got those parts to\nwork together,” said Kristen Kucko, robotics lab director and the school’s\nspace faculty advisor. “This is an engineering feat.”\n\n[ANS thanks NASA Blogs and IARU for the above information]\n\n---------------------------------------------------------------------\n\nCAPSTONE Arrives to Orbit at the Moon\n\nThe CAPSTONE mission operations team confirmed that NASA’s CAPSTONE\nspacecraft arrived at its orbit at the Moon Sunday evening. The CubeSat\ncompleted an initial orbit insertion maneuver, firing its thrusters to put\nthe spacecraft into orbit, at 12:39 UTC on Nov. 13.\n\nCAPSTONE is now in a near-rectilinear halo orbit, or NRHO. This particular\nNRHO is the same orbit that will be used by Gateway, the Moon-orbiting\nspace station that will support NASA’s Artemis missions. CAPSTONE is the\nfirst spacecraft to fly an NRHO, and the first CubeSat to operate at the\nMoon.\n\nIn the next five days, CAPSTONE will perform two additional clean-up\nmaneuvers to refine its orbit. After these maneuvers, the team will review\ndata to confirm that CAPSTONE remains on track in the NRHO.\n\nCAPSTONE – short for Cislunar Autonomous Positioning System Technology\nOperations and Navigation Experiment – is a precursor to the Gateway\nproject to establish a crewed space station in orbit around the moon.\nAMSAT, along with our ARISS partners, is developing an Amateur Radio\npackage, including two-way communication capability, to be carried on-board\nGateway in lunar orbit.\n\n[ANS thanks NASA for the above information]\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\n    Want to fly the colors on your own grid expedition?\n            Get your AMSAT car flag and other neat stuff\n                    from our Zazzle store!\n        25% of the purchase price of each product goes\n            towards Keeping Amateur Radio in Space\n              https://www.zazzle.com/amsat_gear\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\nChanges to AMSAT-NA TLE Distribution\n\nTwo Line Elements or TLEs, often referred to as Keplerian elements or keps\nin the amateur community, are the inputs to the SGP4 standard mathematical\nmodel of spacecraft orbits used by most amateur tracking programs. Weekly\nupdates are completely adequate for most amateur satellites. TLE bulletin\nfiles are updated Thursday evenings around 2300 UTC, or more frequently if\nnew high interest satellites are launched. More information may be found at\nhttps://www.amsat.org/keplerian-elements-resources/\n\nNo changes for this week.\n\n[ANS thanks Ray Hoad, WA5QGD, AMSAT Orbital Elements Manager, for the above\ninformation]\n\n---------------------------------------------------------------------\n\nARISS NEWS\n\nAmateurs and others around the world may listen in on contacts between\namateurs operating in schools and allowing students to interact with\nastronauts and cosmonauts aboard the International Space Station. The\ndownlink frequency on which to listen is 145.800 MHz worldwide.\n\nUral State University, Yekaterinburg, Russia, direct via TBD. The ISS\ncallsign is presently scheduled to be RSØISS. The scheduled crewmember is\nSergey Prokopyev. Contact is go for Mon 2022-11-21 15:20 UTC\n\nSt. Joseph´s Convent Secondary School, Castries, St Lucia, multi-point\ntelebridge via IK1SLD. The ISS callsign is presently scheduled to be\nOR4ISS. The scheduled crewmember is Josh Cassada, KI5CRH. Contact is go\nfor: Tue 2022-11-22 17:40:36 UTC 42 degrees maximum elevation. Watch for\nLivestream at: https://www.ariotti.com/\n\nFive Bridges Junior High School, Stillwater Lake, NS, Canada, telebridge\nvia IK1SLD. The ISS callsign is presently scheduled to be OR4ISS. The\nscheduled crewmember is Josh Cassada, KI5CRH. Contact is go for: Wed\n2022-11-23 16:52:06 UTC 58 degrees. Watch for Livestream at\nhttps://www.youtube.com/c/ARISSlive and https://nslive.tv/five-bridges-ariss\nand https://www.ariotti.com/\n\nAmur State University, Blagoveshchensk, Russia, direct via TBD. The ISS\ncallsign is presently scheduled to be RSØISS. The scheduled crewmember is\nSergey Prokopyev. Contact is go for Mon 2022-11-28 08:20 UTC\n\nSchool TBD, Saint Petersburg, Russia, direct via TBD. The ISS callsign is\npresently scheduled to be RSØISS. The scheduled crewmember is Anna Kikina.\nContact is go for Wed 2022-11-30 14:25 UTC.\n\nSchool TBD, Kaliningrad, Russia, Russia, direct via TBD. The ISS callsign\nis presently scheduled to be RSØISS. The scheduled crewmember is Anna\nKikina. Contact is go for Wed 2022-11-30 16:00 UTC\n\nSchool TBD, Aznakayevo, Republic of Tatarstan, Russia, direct via TBD. The\nISS callsign is presently scheduled to be RSØISS. The scheduled crewmember\nis Anna Kikina. Contact is go for Thu 2022-12-01 08:20 UTC.\n\nSchool TBD, Vologda, Russia, direct via TBD. The ISS callsign is presently\nscheduled to be RSØISS. The scheduled crewmember is Anna Kikina. Contact is\ngo for Thu 2022-12-01 08:20 UTC\n\nThe crossband repeater continues to be active.  If any crewmember is so\ninclined, all they have to do is pick up the microphone, raise the volume\nup, and talk on the crossband repeater.  So give a listen, you just never\nknow.\n\nThe latest information on the operation mode can be found at\nhttps://www.ariss.org/current-status-of-iss-stations.html\n\nThe latest list of frequencies in use can be found at\nhttps://www.ariss.org/contact-the-iss.html\n\n[ANS thanks Charlie Sufana, AJ9N, one of the ARISS operation team mentors\nfor the above information]\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\n    AMSAT, along with our ARISS partners, is developing an Amateur\n    Radio package, including two-way communication capability, to\n            be carried on-board Gateway in lunar orbit.\n\n   Support AMSAT's projects today at https://www.amsat.org/donate/\n\n+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+\n\nUpcoming Satellite Operations\n\nKX9X Will be in EM47 with Ward N0AX the weekend of November 19 for\nthe @arrl Phone Sweeptakes. He’ll take some satellite gear and do a few\npasses. Sats aren’t the priority this trip but he will hand out the grid.\n\nKC1MEB: Rove trip vacation style. FN53 Nov. 18 into 19, FN56 Nov. 19 into\n20, FN57 Nov. 20 through 22.\n\nW7WGC Snow-bird rove from 11-02-2022 thru 11-22-2022-ish. In travel order:\nOregon grids: CN82 and DN02\nNevada grids: DN01, DN10, DN21, DN20, DM29 & 19, DM28 & 18, DM27, DM26.\nArizona grids: DM36, DM46, DM45, DM35, DM44, DM34, DM33, DM32.\nEmail (QRZ) with desired grid in subject line for updates. Wayne – W7WGC\n\n[ANS thanks Paul Overn, KE0PBR, AMSAT rover page manager, for the above\ninformation]\n\n---------------------------------------------------------------------\n\nHamfests, Conventions, Maker Faires, and Other Events\n\nAMSAT Ambassadors provide presentations, demonstrate communicating through\namateur satellites, and host information tables at club meetings, hamfests,\nconventions, maker faires, and other events.\n\nNone currently scheduled.\n\n[ANS thanks Paul Overn, KE0PBR, AMSAT Events page manager, for the above\ninformation]\n\n---------------------------------------------------------------------\n\nSatellite Shorts From All Over\n\n+ The latest episode of the ARRL On the Air podcast features details from\navid satellite operator Sean Kutzko, KX9X, about how to get started on the\namateur satellites -- an activity that's available to hams of all license\nclasses. Sean's article, \"Ham Radio Satellites: Reliable, Accessible, and\nEnjoyable\" is also the cover piece of the November/December issue of ARRL's\n\"On the Air\" magazine. (ANS thanks ARRL Letter for the above information)\n\n+ A cargo spacecraft successfully docked with the International Space\nStation Nov. 9, despite making its two-day trek through space with only one\nfunctioning solar panel. The Cygnus spacecraft, which was carrying 8,200\npounds of science experiments and supplies for the astronauts on board the\nISS, lifted off from NASA’s launch site in Wallops Island, Virginia, atop\nan Antares rocket on Nov. 7. A few hours after Cygnus reached orbit, one of\nthe spacecraft’s two solar arrays failed to deploy, NASA announced. NASA\nand Northrop Grumman, which designed and built the Cygnus capsule, opted to\nabandon efforts to open the array in order to focus on carrying out a safe\nrendezvous with the ISS, noting that the spacecraft already had sufficient\npower to finish its journey. (ANS thanks CNN Space & Science for the above\ninformation)\n\n+ SpaceX launched one of its reusable Falcon 9 rocket boosters for the last\ntime Saturday on a rare expendable mission for Intelsat, devoting all of\nthe launcher’s propellant toward placing a pair of television broadcasting\nsatellites into orbit. Intelsat says it paid SpaceX an additional fee for\nthe expendable mission. The Falcon 9 rocket lifted off at 11:06 a.m. EST\n(1606 GMT) Saturday after a four-day delay caused by Hurricane Nicole. The\nbooster debuted March 2, 2019, with the first unpiloted test flight of\nSpaceX’s Crew Dragon capsule. The booster was not fitted with SpaceX’s\nrecovery hardware, such as titanium grid fins or landing legs. And SpaceX\ndid not deploy one of its drone ships for the expendable mission. (ANS\nthanks SpaceflightNow for the above information)\n\n+ AROW, the Artemis Real-Time Orbit Website, is a fun, interactive display\nof the Orion capsule and the Artemis 1 mission is provided by NASA at:\nhttps://www.nasa.gov/specials/trackartemis/  (ANS thanks NASA for the above\ninformation)\n\n\n---------------------------------------------------------------------\n\nJoin AMSAT today at https://launch.amsat.org/\n\nIn addition to regular membership, AMSAT offers membership to:\n\n* Societies (a recognized group, clubs or organization).\n* Primary and secondary school students are eligible for membership at\none-half the standard yearly rate.\n* Post-secondary school students enrolled in at least half time status\nshall be eligible for the student rate for a maximum of 6 post-secondary\nyears in this status.\n* Memberships are available for annual and lifetime terms.\n\nContact info [at] amsat.org for additional membership information.\n\n73 and remember to help Keep Amateur Radio in Space!\n\nThis week's ANS Editor, Mark Johns, K0JM\nk0jm at amsat dot org\n\n\n",
    "attachments": [
        {
            "email": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/EV7G7WFXWLNXRHVLPSECRIMUHQN3IDWX/?format=api",
            "counter": 2,
            "name": "attachment.html",
            "content_type": "text/html",
            "encoding": "utf-8",
            "size": 25672,
            "download": "https://mailman.amsat.org/hyperkitty/list/[email protected]/message/EV7G7WFXWLNXRHVLPSECRIMUHQN3IDWX/attachment/2/attachment.html"
        }
    ]
}