Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Q4WAYYRD2HU6CNONFFHVYLOJWMMHSKUM/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "Q4WAYYRD2HU6CNONFFHVYLOJWMMHSKUM",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/SKIOQMZV7Q2MKTO7265BX7X7CS2P3JSG/",
    "sender": {
        "address": "wb4gcs (a) amsat.org",
        "mailman_id": "87014499e012476c8198fad186f7f963",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/87014499e012476c8198fad186f7f963/emails/"
    },
    "sender_name": "Jim Sanford",
    "subject": "[eagle] Re: YAHOO!!!! IT WORKS!!!!",
    "date": "2007-09-17T22:19:25Z",
    "parent": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Q4J6BL3PJRFDSUVWSQHYR3FLEJKAUHFR/",
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Don:\nI agree, and thanks.\n\nI think the CAN-Do! manual also needs to be updated, because the next \nteam to integrate a widget will be just as unfamiliar.\nThanks & 73,\nJim\[email protected]\n\n\nDon Ferguson wrote:\n> Jim,\n>\n> You are correct that some documentation is necessary. The reason we did not\n> relate to this concern earlier was that when we received the Widget for the\n> UHF Receiver I first communicated with it using CDNC and in doing a Query\n> the module returned its presence and created log records with the correct\n> address in them.\n>\n> I then used these original Log records to create the data stream to include\n> the initialization data for the U-Rx. The fact that these records already\n> contained the correct address, via CDNC Query, made the concept of Widget\n> Address a non issue.\n>\n> Our lack of understanding was not obvious until we attempted to use our\n> initialization stream on a different widget and the receiver failed to\n> function. There was no noticeable indication from the CDNC program that the\n> widget addressed was not available. \n>\n> It is now apparent that we will need to document this area and I will add\n> some documentation to the CAN-DO part of the U-RX ATP. Others will want to\n> use this experience to guide them in documenting their part of the Eagle\n> project.\n>\n> Don  \n>\n> -----Original Message-----\n> From: [email protected] [mailto:[email protected]] On Behalf Of\n> Chuck Green\n> Sent: Sunday, September 16, 2007 5:53 PM\n> To: Jim Sanford\n> Cc: Robert McGwier; [email protected]\n> Subject: [eagle] Re: YAHOO!!!! IT WORKS!!!!\n>\n> Hi Jim,\n>\n> The mode and address must be soldered onto the widget (jumper pads \n> provided on the widget for this purpose).  It is assumed that the module \n> builder would do this.  It's that assumption that should be documented.  \n> I say this to bring up the follow-on issue.\n>\n> The module builder chooses the mode.\n>\n> The address should be specified by the system administrator since the \n> addresses must be unique for each module and the priority is a function \n> of the address.  Module builders should give input to the system \n> administrator as to what they feel their priority should be, but \n> presumably only the system administrator is in a position to know the \n> priority requirements of *all* modules and is therefor in a position to \n> make these priority (address) decisions.\n>\n> Chuck\n>\n> Jim Sanford wrote:\n>   \n>> Guys:\n>> There's a lesson here:   DOCUMENTATION\n>>\n>> Juan expected/assumed one thing, the CAN-Do! widget was something \n>> else.  Other teams will go through exactly the same issue.  SO, it \n>> appears we need to add some documentation to each WIDGET in terms of \n>> serial number, address, and probably a handful of other things I don't \n>> know about. \n>>\n>> Let's learn from this experience.\n>>\n>> Juan, thanks to you and your team for perservering.\n>>\n>> Stephen, thanks for your prompt support on a short fuse.\n>>\n>> This kind of response and mutual support is exemplary, and what it \n>> will take to get Eagle on orbit.\n>>\n>> Thanks & very 73,\n>> Jim\n>> [email protected]\n>>\n>>\n>> Dave hartzell wrote:\n>>     \n>>> Wow, this is a relief.  I'm glad it was something simple....after all\n>>> the hunting and pecking we did yesterday, I'm glad it was something so\n>>> simple.\n>>>\n>>> I guess when the term \"bus\" is used, an address as probably key to\n>>> getting to your destination.  ;-)\n>>>\n>>> Dave\n>>>\n>>> On 9/16/07, Juan Rivera <[email protected]> wrote:\n>>>   \n>>>       \n>>>> All,\n>>>>\n>>>> We need to take up a collection to buy Stephen a large hero badge.  He\n>>>>         \n> fixed\n>   \n>>>> the problem and the receiver is now sitting on my bench happily\n>>>>         \n> receiving a\n>   \n>>>> signal.  The new CAN-Do module that he sent me had a different address\n>>>>         \n> than\n>   \n>>>> the old one and the old files were addressing the initialization\n>>>> instructions to a non-existent device.  All we have to do is change the\n>>>> address field in the initialization files and everything is fine.\n>>>>\n>>>> Whew!  The train of life in back on the tracks!\n>>>>\n>>>> 73 to all,\n>>>>\n>>>> Juan\n>>>>\n>>>>\n>>>> _______________________________________________\n>>>> Via the Eagle mailing list courtesy of AMSAT-NA\n>>>> [email protected]\n>>>> http://amsat.org/mailman/listinfo/eagle\n>>>>\n>>>>     \n>>>>         \n>>>   \n>>>       \n>> ------------------------------------------------------------------------\n>>\n>> _______________________________________________\n>> Via the Eagle mailing list courtesy of AMSAT-NA\n>> [email protected]\n>> http://amsat.org/mailman/listinfo/eagle\n>>   \n>>     \n> _______________________________________________\n> Via the Eagle mailing list courtesy of AMSAT-NA\n> [email protected]\n> http://amsat.org/mailman/listinfo/eagle\n>\n>\n>\n>   \n\n\n",
    "attachments": [
        {
            "email": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/Q4WAYYRD2HU6CNONFFHVYLOJWMMHSKUM/",
            "counter": 2,
            "name": "attachment.html",
            "content_type": "text/html",
            "encoding": "iso-8859-1",
            "size": 6588,
            "download": "https://mailman.amsat.org/hyperkitty/list/[email protected]/message/Q4WAYYRD2HU6CNONFFHVYLOJWMMHSKUM/attachment/2/attachment.html"
        }
    ]
}