Email Detail
Show an email
GET /hyperkitty/api/list/[email protected]/email/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/?format=api
{ "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/?format=api", "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api", "message_id": "[email protected]", "message_id_hash": "4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP", "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/?format=api", "sender": { "address": "bstrick (a) N5BRG.COM", "mailman_id": "953542c988dd4c549175bb02a8a6a1ed", "emails": "https://mailman.amsat.org/hyperkitty/api/sender/953542c988dd4c549175bb02a8a6a1ed/emails/?format=api" }, "sender_name": "Bob Stricklin", "subject": "[pacsat-dev] Re: Plastic boxes for Prototype board and the CubSat sized prototype", "date": "2023-10-26T16:57:02Z", "parent": null, "children": [], "votes": { "likes": 0, "dislikes": 0, "status": "neutral" }, "content": "I just realized I put the support for the USB connector on the wrong end so I have changed it in this version.\r\n\r\nA new file may also solve your issue.\r\n\r\n\r\nBob\r\n\r\n\r\nOn Oct 26, 2023, at 11:46 AM, Bob Stricklin via pacsat-dev <[email protected]<mailto:[email protected]>> wrote:\r\n\r\nHummm, I did this in Solidworks using inches. The box should be 5.16 inches by 2.66 inches by .46 inches. These are the other dimensions.\r\n\r\nIs there an option for you to select inches or mm in your software.\r\n\r\nI could export this in other formats or in mm if that would help.\r\n\r\nBob\r\n\r\n\r\nOn Oct 26, 2023, at 10:34 AM, Chris Thompson <[email protected]<mailto:[email protected]>> wrote:\r\n\r\nBob,\r\n\r\nIt looks like the size of the box was lost in the export. The STL box is 2.9 x 0.46 x 5.41 mm and will use just 0.44cm of filament according to my slicer. That does not sound right. When I load it into the printer I can not see the box on the preview. I can try to scale it up but not sure what factor to use.\r\n\r\n73\r\nChris\r\n\r\nOn Thu, Oct 26, 2023 at 11:07 AM Bob Stricklin via pacsat-dev <[email protected]<mailto:[email protected]>> wrote:\r\nChris,\r\n\r\nHere are STL files. The 64kb file is the box for the prototype board you have.\r\nLet me know if you see any changes that need to be made.\r\n\r\nThe think the SMA antenna landing places on the larger box will need to be changed.\r\n\r\n\r\nBob\r\n\r\n\r\n\r\n\r\n\r\nOn Oct 26, 2023, at 9:47 AM, Chris Thompson via pacsat-dev <[email protected]<mailto:[email protected]>> wrote:\r\n\r\nBob,\r\n\r\nVery interesting. If you send over the STL files then I will try printing it here. It would be nice to have a box.\r\n\r\n73\r\nChris\r\n\r\nOn Thu, Oct 26, 2023, 10:21 Bob Stricklin via pacsat-dev <[email protected]<mailto:[email protected]>> wrote:\r\nAll,\r\n\r\nAs some of you know, I managed to break the USB connector off the prototype board while taking it to the AMSAT symposium.\r\nI have repaired it by cutting the end off a USB cable and soldering the leads on directly. It's a little kluge but working.\r\n\r\nTo protect my connections and to protect the board a little I designed a box and that will be 3D printed. If this works out\r\nand you want one for your board I can pass along the info later. It will take about two weeks to get the box and check it out.\r\nThere is an area provided for the USB connector. The connector on the PCB will come off without a lot of angular pulling force.\r\n\r\nAlso designed a box for the larger CubeSat prototype. Attaching a copy of this too. I add two places to mount an SMA connector for antennas\r\nwhich may be a stiff piece of wire or connected to a remote antenna. I have order one of these to try out. This is a half baked idea and open for suggestions about\r\nhow to improve on it. I have two covers one for each side so you can get access to parts for testing or changes.\r\n\r\nThe cost for me to make all four parts is about $46 including shipping and handling. I use something called Craftcloud.com<http://craftcloud.com/>.\r\n\r\nBob\r\n\r\n\r\n\r\n\r\n-----------------------------------------------------------\r\n\r\npacsat-dev mailing list -- [email protected]<mailto:[email protected]>\r\nView archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected]\r\nTo unsubscribe send an email to [email protected]<mailto:[email protected]>\r\nManage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org<https://mailman.amsat.org/>\r\n\r\n-----------------------------------------------------------\r\n\r\npacsat-dev mailing list -- [email protected]<mailto:[email protected]>\r\nView archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected]\r\nTo unsubscribe send an email to [email protected]<mailto:[email protected]>\r\nManage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org<https://mailman.amsat.org/>\r\n\r\n\r\n-----------------------------------------------------------\r\n\r\npacsat-dev mailing list -- [email protected]<mailto:[email protected]>\r\nView archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected]\r\nTo unsubscribe send an email to [email protected]<mailto:[email protected]>\r\nManage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org<https://mailman.amsat.org/>\r\n\r\n\r\n--\r\nChris E. Thompson\r\[email protected]<mailto:[email protected]>\r\[email protected]<mailto:[email protected]>\r\n\r\n\r\n-----------------------------------------------------------\r\n\r\npacsat-dev mailing list -- [email protected]<mailto:[email protected]>\r\nView archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected]\r\nTo unsubscribe send an email to [email protected]<mailto:[email protected]>\r\nManage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org\r\n\r\n\n\n", "attachments": [ { "email": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/?format=api", "counter": 3, "name": "attachment.html", "content_type": "text/html", "encoding": "utf-8", "size": 10541, "download": "https://mailman.amsat.org/hyperkitty/list/[email protected]/message/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/attachment/3/attachment.html" }, { "email": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/?format=api", "counter": 4, "name": "Box.STL", "content_type": "application/octet-stream", "encoding": null, "size": 113284, "download": "https://mailman.amsat.org/hyperkitty/list/[email protected]/message/4CKU3CAMH7N5I2HFA2M4IURVPATBLWYP/attachment/4/Box.STL" } ] }