Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/PCWXH6DIF5YNHW7PVVBRHPP53GRUUTI4/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "[email protected]",
    "message_id_hash": "PCWXH6DIF5YNHW7PVVBRHPP53GRUUTI4",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/PCWXH6DIF5YNHW7PVVBRHPP53GRUUTI4/",
    "sender": {
        "address": "wa4cwi (a) bellsouth.net",
        "mailman_id": "4aa6f1e3f4cd4bf4b1492e47285ca527",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/4aa6f1e3f4cd4bf4b1492e47285ca527/emails/"
    },
    "sender_name": "Jim McCullers",
    "subject": "[pacsat-dev] Re: Possible issue with two AX5043s",
    "date": "2024-04-25T16:51:25Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Bob,\n\nI finally got everything back in place and brought Blinky up last night.\nI'm getting a ranging error on device 0 and no messages from the others.\nSame when I attempt the rx command.\nAll four receivers are showing the same frequency.\n\nI checked this morning and I'm not running the latest code so have it\ndownloaded and will test tonight if possible.\nIf it goes well, I'll look into your question.  Technically all four\nreceives should have the same PLL value as the PLL should range over the two\nmeter band.\nI'll look at that as well.  Have to deep dive into the manual.\n\nI'm suffering from a stiff neck this week and not able to do much.  Always\nsomething!\n\nJim \nWA4CWI\n\nLooking at the feedback from the reading the AX5043 devices I see two have\ndifferent PLL vales. The PLL sets the frequency conditions so this may be\ninvolved with the two devices that do not seem to be working.\n\nA listing of the register values reported is attached.\n\nAlso the code I think is setting these registers. I have not had time to dig\ninto the code. If an issue can be seen by someone that has looked at this\ncode I would appreciate the help.\n\n\nBob\n\n\n",
    "attachments": []
}