Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/QYYMB356OWOXPWLQYA6GYQ7QFBHBTWP7/?format=api",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/?format=api",
    "message_id": "[email protected]",
    "message_id_hash": "QYYMB356OWOXPWLQYA6GYQ7QFBHBTWP7",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/QYYMB356OWOXPWLQYA6GYQ7QFBHBTWP7/?format=api",
    "sender": {
        "address": "bstrick (a) N5BRG.COM",
        "mailman_id": "953542c988dd4c549175bb02a8a6a1ed",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/953542c988dd4c549175bb02a8a6a1ed/emails/?format=api"
    },
    "sender_name": "Bob Stricklin",
    "subject": "[pacsat-dev] Power coming out of AX5043",
    "date": "2024-02-17T03:25:40Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "I did test a board today and found it was transmitting every 30 seconds with a power level of about -28 dBm. \n\nI spent some time looking at the code and found where the power level is set to ox0d in a config file and get AX reports this value. \n\nI see in the data sheet for AX5043 where power should range from -10 dB to 16 dB and uses a 12 bit value to set the level. Possibly we are just adjusting upper 8 bits. \n\nWe will also be losing power in the differential to single ended converter and shaping circuit. I will probe on this a little more tomorrow but likely just leave it alone and move on for now to be sure and ship boards Monday. \n\nI also see the 30 second interval in the code and some other comments about setting power but does not seem like this is being used. \n\nI could not get a continuous tone and I did not spend time setting up a tight loop to transmit. \n\nI did change the call sign in the configuration to mine. \n\nBob",
    "attachments": []
}