Email Detail

HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "url": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/T3GPOMOEVXQSNJVZOO6UZLAIXY6RFUP4/",
    "mailinglist": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/",
    "message_id": "CANsNeaoFDH36k3c4dryaubS=GDhJujD=soPbt_puyc+k02Ln5g@mail.gmail.com",
    "message_id_hash": "T3GPOMOEVXQSNJVZOO6UZLAIXY6RFUP4",
    "thread": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/thread/T3GPOMOEVXQSNJVZOO6UZLAIXY6RFUP4/",
    "sender": {
        "address": "rich (a) ourowndomain.com",
        "mailman_id": "de4e965f89da4d4790638af3cb47f33c",
        "emails": "https://mailman.amsat.org/hyperkitty/api/sender/de4e965f89da4d4790638af3cb47f33c/emails/"
    },
    "sender_name": "Rich Gopstein",
    "subject": "[pacsat] Fwd: 9600 baud on IC-9700?",
    "date": "2022-09-23T15:18:27Z",
    "parent": null,
    "children": [],
    "votes": {
        "likes": 0,
        "dislikes": 0,
        "status": "neutral"
    },
    "content": "Some interesting info on falconsat, pacsat, and the IC-9700.\n\n---------- Forwarded message ---------\nFrom: Mark L. Hammond <[email protected]>\nDate: Fri, Sep 23, 2022 at 9:31 AM\nSubject: Re: 9600 baud on IC-9700?\nTo: Rich Gopstein <[email protected]>, Andrew Glasbrenner <\[email protected]>\n\n\nHi Rich, I am delighted to learn about the interest and possibility of a\npacsat board!    Just coordinate with me and the laws of physics (satellite\norbits..) and I can certainly try to turn ON Falconsat-3 for you all.   It\njust won't stay on for more than an orbit or two.  Ideally, you all should\nrecord some of the data downlink so you can run it at will in the shack and\non the bench.  In fact, years ago we built an AMSAT digital archive that\nhad recordings of AO-51, which is the same thing...just a thought.  I did\nmany modem tests/optimizations using recorded files over the years.\n\nIf possible, the satellite OS and PBBS really need to be burned into memory\nonboard the bird, since the uploading of the files needed to run the PBBS\ntake several passes at 9600 baud...    Maybe 2 copies, in case one gets\nbad.  Anyhow, Drew KO5MA and I have a lot experience with running AO-51 and\nFalconsat-3 over the years.  Oh, and of course AO-16/17/18/19...\n\nThe IC-97000 needs to have its FM-D mode act and perform exactly like the\nFM-D mode in the IC-9100.  That gives us audio in and out that supports\n9600 baud that be used with TNCs--hardware or software.   It's stupid that\nthey dropped 9600 support.  In the end, it COULD be as simple as a firmware\nupdate for end users.  Evidently, they are never going to write the code.\n Many of us have begged and tried to lobby for it.\n\nHere to help as needed!  Copying Drew....\n\n73,\nMark L. Hammond [N8MH]\nAMSAT Director and Command Station\n\n\n\nOn Fri, Sep 23, 2022 at 7:19 AM Rich Gopstein <[email protected]> wrote:\n\n> There's a new AMSAT project to look at building a \"pacsat\" board which\n> will have a 9600 baud downlink. As an exercise, we were going to try\n> receiving Falconsat transmissions since it uses the same encoding that is\n> being proposed for the pacsat board.\n>\n> There are at least a couple of us who have 9700s and we weren't sure if we\n> be able to receive at 9600 baud.\n>\n> Just out of curiosity, what do you mean by Icom making the 9700 work \"the\n> right way\"?\n>\n>\n>\n> On Fri, Sep 23, 2022, 6:56 AM Mark L. Hammond <[email protected]>\n> wrote:\n>\n>> Hi Rich,\n>>\n>> Yes, it works on receive.  Shame on Icom for making it work \"the right\n>> way\"....and not allowing TX at 9700 at all.\n>>\n>> It's pretty straightforward.  Put the 9700 in FM mode; set the USB audio\n>> from AF to IF; then point your software decoding program to the 9700\n>> soundcard.  Pretty much all there is to it...I did this with FoxTLM to copy\n>> DUV telemetry on the Fox birds, too.  Same idea...broadband receive to\n>> software.   Another trick--since it's \"only a soundcard\" you can run\n>> multiple decoding software at the same time on the receiver..\n>>\n>> What's your plan for 9600 on the 9700?\n>>\n>> Mark L. Hammond [N8MH]\n>> AMSAT Director and Command Station\n>>\n>>\n>>\n>> On Thu, Sep 22, 2022 at 10:59 PM Rich Gopstein <[email protected]>\n>> wrote:\n>>\n>>> Mark,\n>>>\n>>> Burns mentioned that you have successfully received 9600 baud\n>>> transmissions using an IC-9700?\n>>>\n>>> Are the details available somewhere?\n>>>\n>>> Thanks.\n>>>\n>>> Rich, KD2CQ\n>>>\n>>>\n>>>\n\n\n",
    "attachments": [
        {
            "email": "https://mailman.amsat.org/hyperkitty/api/list/[email protected]/email/T3GPOMOEVXQSNJVZOO6UZLAIXY6RFUP4/",
            "counter": 2,
            "name": "attachment.html",
            "content_type": "text/html",
            "encoding": "utf-8",
            "size": 5491,
            "download": "https://mailman.amsat.org/hyperkitty/list/[email protected]/message/T3GPOMOEVXQSNJVZOO6UZLAIXY6RFUP4/attachment/2/attachment.html"
        }
    ]
}