Looks like everything is working correctly. I see your packets are making it to the APRS-IS:
http://www.findu.com/cgi-bin/raw.cgi?call=PFS3-11&start=12&length=12...
Congratulations!!
73, Ken, W7KKE
-----Original Message----- From: vk4tec@tech-software.net [mailto:vk4tec@tech-software.net] Sent: Friday, October 13, 2017 04:03 To: 'Australian APRS Users' ozaprs@aprs.net.au; 'Ken Swaggart' k.swaggart@charter.net Cc: 'AMSAT -BB' amsat-bb@amsat.org; 'Peter' vk4khp@netspace.net.au Subject: RE: [OZAPRS] [amsat-bb] FalconSat-3 sig level to decode
I have Direwolf decoding FalconSat-3
+ Diamond x200 + LDF4-50 + Airspy Mini + VB Audio Cable + Direwolf 9600
But I don’t see these making it to the APRS-IS
Reading config file direwolf.conf Available audio input devices for receive (*=selected): 0: CABLE Output (VB-Audio Virtual 1: Microphone (Realtek High Defini Available audio output devices for transmit (*=selected): 0: Speakers (Realtek High Definiti 1: CABLE Input (VB-Audio Virtual C Channel 0: 9600 baud, K9NG/G3RUH, +, 44100 sample rate x 2. The ratio of audio samples per sec (44100) to data rate in baud (9600) is 4.6 This is on the low side for best performance. Can you use a higher sample rate? Note: PTT not configured for channel 0. (Ignore this if using VOX.) Ready to accept AGW client application 0 on port 8000 ... Ready to accept KISS client application on port 8001 ...
Now connected to IGate server rotate.aprs.net (205.233.35.46) Check server status here http://205.233.35.46:14501
[ig] # aprsc 2.1.4-g408ed49 [ig] # logresp VK4TEC-5 verified, server NINTH
Connected to AGW client application 0 ...
Ready to accept AGW client application 1 on port 8000 ...
PFS3-11 audio level = 1(+2/-2) [NONE] ____||||: [0.6] PFS3-11>PBLIST:PB: Empty.<0x0d> Unknown APRS Data Type Indicator "P", Original Balloon (think Ham b
PFS3-12 audio level = 2(+2/-2) [NONE] :|||||||: [0.4] PFS3-12>BBSTAT:Open ABCD:<0x20> Unknown APRS Data Type Indicator "O", JEEP
PFS3-11 audio level = 2(+2/-2) [NONE] |||||||__ [0.3] PFS3-11>STATUS:B: 8559818<0x0d> Unknown APRS Data Type Indicator "B", Original Balloon (think Ham b
PFS3-1 audio level = 2(+2/-2) [NONE] __:|::___ [0.3] PFS3-1>TLMC-1:CL:0 Unknown APRS Data Type Indicator "C", Ambulance
Error getting message header from AGW client application 0. Tried to read 36 bytes but got only 0. Closing connection.
audio level = 3(+3/-3) [NONE] _____|___ [0.5] (Not AX.25)J<0x15><0xc8><0xae><0x18><0xc9>8<0x89>O<0x98><0xd3><0x9b><0x16><0x98><0xae><0x8b>i<0xa7><0x85><0x1e><0x0b>i<0x02><0xbc>m<0x86>u<0x08>